Examples of 'grit sandpaper' in a sentence
Meaning of "grit sandpaper"
grit sandpaper - This phrase refers to a type of sandpaper that has a coarse and abrasive texture. It is commonly used for sanding or smoothing rough surfaces, such as wood or metal, by removing material or creating a rougher texture for better adhesion. The term 'grit' refers to the size or coarseness of the abrasive particles embedded in the sandpaper, which can vary depending on the desired level of abrasion
How to use "grit sandpaper" in a sentence
Basic
Advanced
grit sandpaper
A fine grit sandpaper was used as the abrasive material.
By postprocessing the printed object with a piece of fine grit sandpaper.
Choose the proper grit sandpaper for your application.
The tip of the syringe needle was flattened using a fine grit sandpaper.
Progress to finer grit sandpaper until the desired finish is obtained.
Do not change from coarse grit to very fine grit sandpaper in one step.
Select a coarse grit sandpaper disc to help prevent the sandpaper from clogging.
Maybe I should try it again with fine grit sandpaper.
Gradually switch to a fi ne grit sandpaper until you achieve the desired fi nish.
Your sander is suitable for sanding with coarse, medium, and fine grit sandpaper.
Gradually switch to a fine grit sandpaper until you achieve the desired finish.
Some can leave you with a finish close to that of 220 grit sandpaper.
Begin sanding with an abrasive grit sandpaper coarse enough to remove the high spots.
Clamp workpiece to fence or glue 120 grit sandpaper.
Use medium grit sandpaper to roughen the tail gear wire where it contacts the rudder.
See also
I Begin sanding with an abrasive grit sandpaper course enough to remove.
Use medium grit sandpaper to roughen the elevator torque rod where it contacts the elevator.
Clamp workpiece to fence or glue 120 grit sandpaper to fence with rubber cement.
U Coarse grit sandpaper Fast paint, varnish and rust removal.
To level a rough surface quickly, use a coarse grit sandpaper disc such as 80 grit.
What is the finest grit sandpaper you recommend to use before water popping?
His hands are like 80 grit sandpaper.
Use medium grit sandpaper ( grain 100 ) to remove scratches left behind by coarse sandpaper.
Sand the concrete sphere with 100 grit sandpaper to make the surface smooth.
The cured film is may be sanded smooth with 500 grit sandpaper.
The coating could be sanded with 320 grit sandpaper and base coated immediately right after curing.
Maple veneers were sanded with 220 grit sandpaper.
I used a file and some 120 grit sandpaper to smooth this out.
The cured veneer was then sanded with 280 grit sandpaper.
A film developed using commercial particle size of 1200 grit sandpaper increased the luminous efficacy in 26.
Remove any burrs from frame 's seat tube edges then smooth with 400 grit sandpaper.
Not this guy . His hands are like 80 grit sandpaper.
According to one embodiment, the wood surface should have a texture similar to approximately 80-100 grit sandpaper.
The cured film is preferably sanded smooth with 500 grit sandpaper.
Sand the 10mm x 7mm end of the block using medium grit sandpaper.
Finally, I like to finish off everything with some 220 grit sandpaper.
You'll also be interested in:
Examples of using Sandpaper
Show more
Press the sandpaper to the sanding plate
For this purpose fine sandpaper is used
Use fi ne sandpaper or emery cloth to clean terminals
Examples of using Grit
Show more
So we grit our teeth and do the job
Her story is that of grit and determination
Higher grit number corresponds to a smoother finish
