Examples of 'guard plate' in a sentence
Meaning of "guard plate"
guard plate: Refers to a protective covering or shield used to defend against impact, damage, or unwanted access. This phrase is often used in the context of security, construction, or industrial applications
How to use "guard plate" in a sentence
Basic
Advanced
guard plate
A guard plate is mounted by a screw to the plate.
Mowing blade with guard plate.
The adjusting guard plate must be frequently set to.
This would have a similar effect to connecting it to the guard plate.
Screw the guard plate on at the rear with the.
The shield plate may be connected to the guard plate or to ground.
Make sure the guard plate is completely hooked at the hook receiver.
This shield plate may be connected to the guard plate or even an extension thereof.
Guard plate installation For nylon line operation.
The knife integrated in the guard plate automatically cuts the line to the optimum length.
Therefore, the canister can be protected from behind by the guard plate.
This means that the guard plate may both pivot and move vertically on the plate.
Figure 19 shows the problems associated with having an insufficiently large guard plate.
The guard plate must audibly engage on the cutting head 2.
The two strips of metal form a guard plate 2 and the sensor plate.
See also
Rigid guard plate or security member 4 is of the type described before.
An automobile door assembly comprising a guard plate assembly according to any one of claims 1 to 9.
Device as claimed in claim 7, wherein the guide member further comprises a transverse guard plate.
A sensor plate 1 and a guard plate 2 are typically mounted inside the bumper of a vehicle.
The middle part of the drip is still capacitively coupled to the drip guard plate 70.
In Figure 3, a guard plate is formed on the nozzle plate thereby providing an protective layer.
A configuration having no wind guard plate 95 is also possible.
As indicated above, the shield plate 7 is connected to the guard plate.
An enlarged guard plate 12 is then laid along the interior surface of the bumper skin 5.
Therefore, the back of the canister 10 can be protected by the guard plate 13.
The reference numeral 23g denotes a guard plate disposed along a lower part of the regulating roller 23.
Guard plate - Accessories for angle grinders - Hilti Denmark.
In Figure 1, the sensing plate and guard plate have uniform widths as shown in Figure 3a.
The guard plate 13 is attached to the air cleaner 9.
Align the holes [ 4a ] on the wheel guard plate with the holes on the wheel guard 4b.
The guard plate 12 includes a plurality of cylindrical guides 34.
This capacitive coupling is formed where the extended guard plate and the conductive coating 30 overlap 33a, 33b.
Set the guard plate in relation to the cutter head 2-1.
The guard plate ( 6 ) is a vacuum-moulding, and should be removed from its scrap material.
The guard rods 72 and the guard plate 74 prevent the heater block 66 from being accessed carelessly.
The guard plate 13 is fixed to the fixing part 9b of the air cleaner 9.
A gap T is formed between the guard plate 71 and the outer peripheral surface 25a of the drum 25.
The guard plate 13 is arranged in front of the rear wheel 4.
Fit cut off knife on the guard plate and tighten two bolts ( M5 X 14 ) and nuts.
The guard plate 13 may cover the entire back of the canister 10.
The guard plate 16 is connected to the VSS rail of the inverter 20.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
