Examples of 'guide bar' in a sentence
Meaning of "guide bar"
This phrase refers to a metal or wooden bar that is used as a guide or support for something, often in machinery or construction. It helps to maintain alignment, stability, or accuracy in the operation or movement of a tool or object
How to use "guide bar" in a sentence
Basic
Advanced
guide bar
Inspect guide bar before sharpening chain.
Never use a cracked or warped guide bar.
Guide bar nose sprocket is not turning.
Kickback and guide bar nose radius.
Guide bar and chain are now accessible.
Clean the guide bar sprocket tip.
Guide bar sprocket nose needs greasing.
Lift up the guide bar tip slightly.
Guide bar and saw chain combinations.
Assembly of the guide bar and chain.
With guide bar and chain to rear.
Remove burrs from sides of guide bar.
The guide bar should always be a square.
Replacing the guide bar and chain.
Guide bar for channelling the passage.
See also
Two to four guide bar tricot machine.
Use a wedge to free the guide bar.
Install guide bar onto saw body.
Exchanging saw chain and guide bar.
Check guide bar and chain assembly.
Then attach the guide bar cover.
Pull guide bar forward until chain is.
The simplest device is the guide bar.
Oil the guide bar sprocket nose.
The transmission element may be a guide bar.
A worn or damaged guide bar is unsafe.
Check guide bar and chain for damage.
Remove and clean guide bar and chain.
The guide bar supports chain.
Remove sawdust from guide bar groove periodi.
Guide bar and chain not assembled correctly.
Hold saw so guide bar is horizontal.
Guide bar and chain not assembled right.
Pull the thread guide bar up as far as it will go.
Clean the guide groove of the guide bar.
Pull the guide bar to tension the chain.
Chain assembled backwards on guide bar.
Tighten guide bar nut finger tight only.
Never saw with the guide bar tip.
Replace guide bar if this occurs.
Do not use the nose of the guide bar.
Cover the guide bar with the scabbard.
In a carrying case or with scabbard over guide bar.
Use top of guide bar to make this cut.
Tighten the bolt to secure the guide bar.
Remove guide bar and clean oil slot.
Clogged oil slot in guide bar.
Grip guide bar firmly with both hands.
Thus clamping of the guide bar can be avoided.
The guide bar can be hot after cutting.
You'll also be interested in:
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
Examples of using Bar
Show more
I am setting the bar low so we are not disappointed
Bar gang out of town remains safe
I stopped at the bar to drink some beers
