Examples of 'guide fence' in a sentence
Meaning of "guide fence"
guide fence: a barrier or structure that provides guidance or direction, often used for safety purposes
How to use "guide fence" in a sentence
Basic
Advanced
guide fence
Against the guide fence on the saw.
Molding edge against guide fence.
Use the guide fence to ensure a straight cut.
Ceiling contact edge should be against guide fence.
Set the guide fence square with the table.
Wall contact edge should be against guide fence.
Push the guide fence into the insertion openings.
Ing the planer with the guide fence.
A guide fence also is available for cutting straight lines.
Use wood facing against the guide fence when.
Screw the guide fence into the left or right fence.
Push the carriage toward the guide fence fully and.
The guide fence can be fi xed on the left or right of the appliance.
Loosen the clamping screw on the guide fence by turning counterclockwise.
Use screws to attach the wood facing to the guide fence.
See also
The position of the guide fence can be adjusted to suit different tasks.
Tighten the grip securely and loosen the hex bolts on the guide fence.
Secure the workpiece against guide fence and turn table.
The guide fence can be fixed on the left or right of the appliance.
Align the machine using the guide fence or by using a marked line.
Use the guide fence to ensure the same angle is cut during each repetitive pass.
When cutting longitudinally always use a guide fence or a straight edge guide.
Turn base and guide fence with the vise during all operations.
Press the workpiece flat against the guide fence and the turn table.
Exert some slight sideways pressure when guiding the planer with the guide fence.
Attach a wood facing to the guide fence using the holes in the guide fence.
Secure the slide poles after pulling the carriage toward the guide fence fully.
Push the carriage toward the guide fence fully and lower the handle completely.
Poor machine guidance Use parallel guide fence.
Against the turn base and guide fence with the vise during all operations.
Tighten the grip and loosen the hex bolts securing the guide fence using the wrench.
Respective opposite ends of the guide fence engage with opposite edge portions of the base.
The sub-fence can be installed on the guide fence.
Push the carriage toward the guide fence and tighten the knob to secure the carriage.
During a slide cut, gently push the carriage toward the guide fence without stopping.
Using the Parallel Guide Fence provides accurate cuts without the need to follow pencil lines.
Loosen the hex socket bolt securing the guide fence using the hex wrench.
Attach the guide fence 6 to the device with the fixing screw.
Insert the vise rod into the hole in the guide fence and tighten the.
Guide fence ( SLIDING FENCES which are upper and lower fences ) adjustment WARNING.
Molding edge against guide fence Finished piece.
Riage fully and press down handle, then push carriage toward the guide fence.
Accessories included, guide fence and 6 included tips.
The sub-fence R should ordinarily be installed on the right side of the guide fence.
If necessary adjust the machine to the guide fence 11 or a drawn line.
A horizontal guide fence 20 guides the lower edge of the article 2 to be printed.
The sub-fence R can be installed on the right side of the guide fence.
The guide fence can be fixed on the left - or right-hand side of the appliance.
The sub-fence R can be removed from the right side of the guide fence.
Figure 3 shows a similar form of guide fence to that of Figures 1 and 2.
You'll also be interested in:
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
Examples of using Fence
Show more
I want the fence and the baby
Fence the waste brine conditioning ponds
Be sure to use the fence for protection
