Examples of 'guide plate' in a sentence
Meaning of "guide plate"
guide plate: This phrase could refer to a component or device that helps direct or control the movement of something else in a specific context, such as in machinery or construction
How to use "guide plate" in a sentence
Basic
Advanced
guide plate
Remove the guide plate before the.
Interval between vise and guide plate.
Angled guide plate for a rail profile.
Loosen the screw on the guide plate.
Pull out until guide plate becomes visible.
Backlight unit with a light guide plate.
The scale on the guide plate is only a rough.
This zone was occupied by a stationary guide plate.
The guide plate can be formed to a desired width.
Press fabric against the guide plate of the.
Fluid guide plate and associated plate heat exchanger.
The thickness of the guide plate may vary.
The chain guide plate includes a disengagement part guide.
Tilt the motor section against the guide plate.
The base member of the guide plate further includes.
See also
A chain guide plate and a chain locus regulating means.
Do not use core bits with with guide plate.
Rest the guide plate fully on the workpiece when operating.
Thread guide r and thread guide plate t on the right.
The magnetic head is rigidly mounted to a document guide plate.
Thread guide r and thread guide plate t on the left.
Bolt the guide plate to the angle arm with the.
Remount the protective plate and the guide plate.
The guide plate comprises struts between the through holes.
Adjust the depth of the guide plate with the.
Light guide plate and method for the production thereof.
Never perform miter cuts when the guide plate is.
The guide plate is positioned on the container adjacent the cavity.
Never perform miter cuts when the guide plate is set at.
Thus a single guide plate can have multiple pipes connected to it.
The fibres extend in the longitudinal direction of the guide plate.
The second guide plate is of magnetizable material such as ferromagnetic steel.
The narrow part is lifted by a guide plate towards and past a support.
Such a guide plate may provide a wanted stiffness of the vessel structure.
Remove the two hex bolts which secure the guide plate.
Set the guide plate with its lib facing toward you.
The containers were externally provided with a guide plate as a continuation of the wing.
Set the button guide plate on buttonhole foot to the desired length.
The web may extend to the trailing edge of the guide plate.
Move the guide plate to the desired position then tighten the screw.
Attach this spacer with screws through the holes in the guide plate.
Push the guide plate onto the pointed end of the center pin.
Assemble the upper handle using the handle nut on the guide plate.
Remove the guide plate if the tap is too large to fit the adapter.
The quality of the lamp is reduced because the light guide plate is omitted.
The guide plate should preferably have a low coefficient of adhesion and friction.
It also includes a top surface mold frequently referred to as the finish guide plate.
The guide plate defines a cavity through which the engagement shaft extends.
The entire reflector film is in optical contact with the light guide plate.
Insert the center pin and guide plate assembly into the core bit.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
