Examples of 'gypsum boards' in a sentence
Meaning of "gypsum boards"
gypsum boards - Construction materials made of a layer of gypsum plaster pressed between two thick sheets of paper. Gypsum boards are commonly used in interior walls and ceilings to provide a smooth surface for painting or wallpapering
How to use "gypsum boards" in a sentence
Basic
Advanced
gypsum boards
Thicknesses in brackets apply to special gypsum boards.
Gypsum boards for construction purposes.
All joints between adjoining gypsum boards may remain unfilled.
Gypsum boards may be provided with one or more mats.
Silicone oil is known for use as a water repellent in gypsum boards.
Gypsum boards give you the possibility to level irregularities with minimal effort.
There shall be no cavity between the gypsum boards and the substrate.
The plasterboards may be fire resistant plasterboards or any other type of gypsum boards.
A typical roof deck system incorporating the gypsum boards of the invention is as follows.
The fibrous mats described herein may be used as facer for gypsum boards.
The present invention can make fiber gypsum boards from a variety of different fibers.
Such a modified OSB board can be used as an alternative to the gypsum boards.
Fastening gypsum boards on the final structure of the doorway ;.
After the experiment the microbe species of both gypsum boards were determined and compared.
Behind the gypsum boards may be an air space, or an insulating product.
See also
An average bead width of 1 inch was measured on the gypsum boards.
In general, the gypsum boards are produced by a continuous slurry pouring and casting process.
Once the crate is made of the first level, it obsheyte gypsum boards.
Further, gypsum boards with edge portions intentionally reduced in thickness are often produced.
A wall, a partition, a ceiling or a floor comprising gypsum boards for shielding radioactive rays.
The gypsum boards were laid out, alternating gypsum board types, along the ceilings.
Installing modular walls, such as Gypsum boards for walls.
CGC gypsum boards are produced using a highly automated, continuous process.
FIG . 1 is an explanatory view partially and schematically illustrating a forming process of gypsum boards.
Each joint between adjoining gypsum boards shall have a gap width ≤ 4 mm and may remain unfilled.
Gypsum boards containing glass fiber tissues were manufactured at a manufacturing rate of 15 m / min.
As a result, gypsum boards are produced.
FIG . 1 is a partial cross-sectional view showing configurations of edge portions of gypsum boards.
AU told, gypsum boards were made with twelve different mat combinations.
The sample is located between two gypsum boards with a nominal gap of 20 mm.
Thus, gypsum boards were manufactured.
Referring now to FIG.1, there is generally illustrated a process for producing gypsum boards.
The surface hardness was firstly measured with respect to the twenty-four ( 24 ) gypsum boards.
You'll also be interested in:
Examples of using Boards
Show more
Passenger who boards a road vehicle to be conveyed by it
Welcome to part two of the surgical boards
Do not place boards on foam packing materials
Examples of using Gypsum
Show more
Add more gypsum board to wall surfaces
Assemblies with a double layer of gypsum board
And there is a gypsum belt running below it
