Examples of 'hand tighten' in a sentence
Meaning of "hand tighten"
The phrase “hand tighten” is often used in situations where you need to tighten something manually using your hand, rather than using a tool or machinery. It could refer to tightening the grip of a hand-held object, such as a lid, knob, or handle
How to use "hand tighten" in a sentence
Basic
Advanced
hand tighten
Hand tighten both terminal nuts securely.
The direct drain and hand tighten.
Hand tighten the screws on the dome.
Replace fuel cap and hand tighten.
Hand tighten until a snug fit is obtained.
Slide collar up to check valve and hand tighten.
Hand tighten strainer cover down snugly.
Install the wing nut and hand tighten.
Hand tighten legs to the appliance base.
Install new defector and hand tighten bolts.
Hand tighten the two lock screws.
Replace the maintenance cover and hand tighten.
Hand tighten the rod for further adjustment.
Replace maintenance cover and hand tighten screws.
Hand tighten for further adjustment.
See also
Replace the retaining knob and hand tighten.
Hand tighten sufficiently to provide leak free joint.
Reinstall side maintenance cover and hand tighten.
Hand tighten the lock ring after adjustment.
Thread housing on filter head and hand tighten.
Hand tighten the coupling nuts.
Install remaining screws and hand tighten all.
Hand tighten to avoid damage to fittings.
Install tip and guard on gun and hand tighten.
Insert and hand tighten desired contact tip.
Replace the fuel cap immediately and hand tighten it.
Hand tighten the air cleaner cover screws.
Hang hood onto mounting screws and hand tighten.
Hand tighten bolts only until assembly is completed.
Immediately replace fuel cap and hand tighten by turning it clockwise.
Hand tighten top nut on linkage rod until snug.
Thread the housing back on the head and hand tighten.
Be sure to hand tighten when screwing to the terminal block.
Place screws into all aligned holes and hand tighten.
Hand tighten parts together in the order illustrated above.
Hang hood onto the mounting screws and hand tighten each.
Hand tighten the two hose fittings in a clockwise direction.
Place the blade fl ange on the spindle and hand tighten the bolt.
Insert and hand tighten the oil filler cap.
Reinstall the side maintenance cover and hand tighten the cover screws.
Hand tighten the screws until final adjustments are made.
Place the blade flange on the spindle and hand tighten the blade bolt.
Hand tighten the lug nuts until securely fastened.
Push in the spindle lock button and securely hand tighten the sanding pad.
Hand tighten the coupler clockwise until it comes to a full stop.
Slide fence against left edge of tool in port and hand tighten alignment fence knob.
Hand tighten the nut to the post of the electronic control.
Place the handle over the auger shaft and hand tighten the screw knob.
Hand tighten the nuts attaching the center and bottom brackets.
Insert the middle four screws through the door hinge into the cabinet and hand tighten.
