Examples of 'handle tube' in a sentence
Meaning of "handle tube"
handle tube: Might pertain to a cylindrical container or object used for grasping, holding, or managing in some capacity
How to use "handle tube" in a sentence
Basic
Advanced
handle tube
Handle tube bolts and knobs assembled to handle tubes.
Snap cloth bag clip onto lower handle tube.
Align slot in lower handle tube with notch in nozzle opening.
The locking lever is on the lower part of the handle tube.
Align slot in upper handle tube with notch in carry handle.
The neck forms an integral sleeve around the handle tube.
Pulling the handle tube back will activate the steam pump.
Pull cloth bag off of carry handle and lower handle tube.
Grasp handle tube firmly and slide tube into battery housing.
Align slot in top of lower handle tube with notch in carry handle.
Adjust handle tube in a comfortable position by untighten the adjusting knob at the desired height.
Loosen tightening knob on handle receptacle and insert handle tube into frame.
Check the lower handle tube and bag inlet for blockages.
Slide the bag Inlet off of the lower handle tube.
A lower portion of the handle tube comprises a cam rib similar to that previously disclosed.
See also
Wind supply cord around the 2 clips on the handle tube.
Insert handle tube in the upper canister housing see figure 4.
The bush 6 can be held in place by crimping the handle tube.
Release the handle bracket from the handle tube by removing the two screws . Fig.
In operation, a user depresses the spring biased locking pin to release the extended handle tube.
Return the handle tube to the upright position and turn the steam mop ‘ OFF.
When you have finished using the steam mop, return the handle tube to the upright.
The end of the handle tube 1 is inserted in the sleeve portion 5.
The insert could, of course, be made integral with the handle tube.
The backrest 2 includes a U-shaped handle tube 19 which has an opening directing downwards.
The sheath 96 is sized to slidably receive a stowable handle tube 128 therein.
Grip the Operator Handle Tube ( 1 ) and push the machine forward to.
Place handle cover into holes located on - ~ front of handle tube assembly Diagram 2.
The handle tube 128 can comprise rolled, welded steel, aluminum or extruded plastic, for example.
Attention, Do not loose the nuts! 2 Lead the handle tube and mains cable into the.
You'll also be interested in:
Examples of using Tube
Show more
The telescopic tube must be tightly locked
Tube him while you have an airway
Replace with a new tube connecting piece
Examples of using Handle
Show more
You can barely handle one woman
Handle circuit boards only by the edges
To reattach the handle on the opposite side
