Examples of 'handsheets' in a sentence
Meaning of "handsheets"
handsheets (noun): Handsheets are thin sheets of paper or fabric made by hand for testing purposes, such as determining the quality of pulp used in papermaking
How to use "handsheets" in a sentence
Basic
Advanced
handsheets
The handsheets are handled aseptically to minimize bacterial contamination.
No sticking of the paper handsheets to the screen was noted.
All values below are an average of four separate handsheets.
Paper handsheets are made with an automatic dynamic handsheet machine.
All experiments were conducted using the same batch of handsheets.
A set of paper handsheets were subjected to near infrared reflectance analysis.
The product was used to make handsheets on the same day.
The handsheets exhibited white speckles against a grey background.
No white water was used in preparation of the subsequently made handsheets.
The repulped paper handsheets did not stick to the screen.
Handsheets of every sample are made and their brightness measured.
Four sets of handsheets were created.
Experiments were performed on handsheets.
The paper handsheets are prepared with an automatic dynamic handsheet machine.
The following procedure was used to make laboratory handsheets for evaluation.
See also
These handsheets are a surrogate for actual commercially prepared specialty papers.
Dry tensiles were measured by breaking the handsheets in a tensile tester.
Laboratory paper handsheets were produced with various internal size emulsions.
Tensile tests and humidity aging tests were performed on these handsheets.
Handsheets were then made from the pulp using a standard handsheet process.
The activated solution was used to make handsheets within four hours of activation.
The wet handsheets are pressed in a rotary press and dried in rotary drier.
Samples of the pulp so treated were used to make handsheets for further testing.
Wet handsheets were prepared and pressed onto the treated roll surfaces.
Some increase in wet strength performance is seen activating the resin prior to preparing handsheets.
The handsheets were examined in transmitted and reflected light for water dispersibility failures.
Greater variation in permeability was realized with handsheets made from the least refined stock.
Handsheets from the pulp can then be made in order to check the final brightness.
The absorbency of the cured and the uncured handsheets was measured using a water drop test.
Small wet formed handsheets were made from the respective fibers and light reflectance was determined.
Anionic polymer solution is sprayed onto the formed handsheets attached onto a wire with a vacuum underneath.
Laboratory handsheets were prepared as following standard SCAN methods.
Brightnesses were obtained from single handsheets using a Technidyne instrument.
Handsheets having a similar basis weight to the Swedish material were made.
These high wet strengths are present for handsheets prepared with and without softwood fibers.
Then handsheets of every sample are made to measure the BRIGHTNESS of each sample.
The WAARV of the corresponding handsheets are given in the table below.
The handsheets made with HBA had highly blemished surface irregularities.
The test pulps were made into handsheets with a FRET sheetformer.
SCT strength and burst strength index values for the prepared handsheets.
Handsheets were produced according to TAPPI procedures.
Wet tensile strength was measured on specimens taken from the Noble and Wood handsheets.
The handsheets were made using a TAD Simulator.
After spraying, the handsheets are wet pressed.
The handsheets were dried in vacuum dryers to a moisture content of 7 % by weight.
This material was evaluated in handsheets using the procedures of examples 1 to 6.
In order to demonstrate the present invention, various handsheets were made.
After formation the handsheets were at about 5 percent consistency.
In addition, composites were prepared combining handsheets and two polymers.
Four to five handsheets were made from each pulp, including the control.
