Examples of 'handwheel' in a sentence
Meaning of "handwheel"
Handwheel (noun) - a wheel that is designed to be operated by hand
Show more definitions
- Any wheel worked by hand, whether used to allow leverage, as of a valve or a handbrake, or to allow fine adjustment, as of a set screw.
How to use "handwheel" in a sentence
Basic
Advanced
handwheel
Superimpose handwheel positioning during program run.
Manual release of brake via actuating handwheel.
Turn the handwheel to lower the needles.
Tighten chuck with snap spin of handwheel.
The handwheel remains locked in this position.
Assembling blade raising and lowering handwheel.
The handwheel is pulled for bobbin winding.
New status display for handwheel superimposition values.
Handwheel superimpositioning is possible in various coordinate systems.
Counter hold handwheel when tightening.
Handwheel for adjusting the cutting height.
Sewing machine handwheel pulley size.
Handwheel superimposition during thread cutting.
Be sure that the declutch knob in the handwheel is.
Superimposing handwheel positioning during program run.
See also
Depth adjustable by turning the handwheel.
Each handwheel unit can be used seperately.
Standard design for handwheel adjustment.
Pull handwheel out from carriage.
Undo bolt and remove handwheel.
Make sure handwheel is in its full off position.
Individual adjustable of the turning resistance on spindle handwheel.
Rotate handwheel until the clutch engages again.
Confirm by pressing the handwheel shortly.
The handwheel is connected electrically via screw terminals.
Traverse of the turret was with a handwheel.
The handwheel turns toward you.
Raise the needle by turning the handwheel toward.
Handwheel with position indicator optional.
It ignores the pulses from the individual handwheel.
Turn the handwheel toward you to bring up the.
Indicates the axes selected by handwheel.
Now rotate handwheel in sewing direction.
Move valve to the required position by turning the handwheel.
Remove handwheel before flame treatment.
Match the matching up marks on handwheel and side cover.
The handwheel is tight against the ball rod.
Steam quantity controller via handwheel on the steam gun.
The handwheel does not move during motor operation.
Lower the pan completely by rotating the lateral handwheel.
Turn carriage handwheel to back die head off pipe.
Which is more convenient and flexible with handwheel control.
Turn handwheel towards you until needles are fully raised.
The aforementioned split nut is manually actuatable by means of a handwheel.
Turn the handwheel until the needle is fully raised.
I actually dislike this handwheel.
Turn the handwheel forwards until the needle is raised.
This motion can be effected manually with a handwheel or by an electric drive.
Turn carriage handwheel to bring dies against end of pipe.
Stop the machine and turn the handwheel toward you to.
