Examples of 'hardness can' in a sentence
Meaning of "hardness can"
A measure of how resistant solid matter is to various kinds of permanent shape change when a compressive force is applied ~ In the context of materials science and engineering, hardness can refer to the property of a material or substance that determines its ability to withstand deformation or indentation
How to use "hardness can" in a sentence
Basic
Advanced
hardness can
The carbon hardness can be raised easily.
In this way an accordant correlation between coercive field strength and hardness can be seen.
The hardness can be calculated by a conventional method.
Various metals of high hardness can be adopted.
Water hardness can change over a period of time.
A list of minerals in order of hardness can be a handy reference.
The hardness can also be increased.
Coals to which cohesive hardness can be attributed need a.
Hardness can be quantified by instrumental analysis.
The overall toughness hardness can be used repeatedly.
Ice hardness can vary even within short distances.
Subsequent changes to the water hardness can be made at any time.
Temporary hardness can be removed by boiling the water.
Beginners start with a soft sole and the hardness can be increased as they learn.
This hardness can be adapted.
See also
If needed, brushes of different configuration and hardness can be used.
Permanent hardness can be removed by.
For specific applications, particles of higher hardness can be used.
Tablet hardness can be determined by commercially available hardness testers.
Thus, also tensile strengthand hardness can increase slightly.
Variations in hardness can be chosen to provide different bending characteristics.
Depending on the steel or cast alloy, an increase in hardness can be achieved.
Hardness can be your choice.
This increased surface hardness can impede adhesion of the powder.
Hardness can be defined in terms of both indentation and compression hardness.
The degree of water hardness can vary from very soft to very hard.
Thus, remaining of the soft zone having low hardness can be avoided.
The thickness and hardness can then be adjusted by additional swelling.
Consequently, a forged article having high hardness can be reliably obtained.
The hardness can be adjusted by a heating treatment that follows molding.
However, this penis hardness can vary significantly.
The hardness can be evaluated easily by a penetration test measuring the degree of penetration.
In another aspect, catheter hardness can vary in a transverse direction.
Their hardness can be controlled by varying the heat treatment temperature.
In all cases a significant increase in hardness can already be detected after 30 minutes.
This hardness can be expressed as a function of the dry blot and rub test.
With increased aeration, which aids in dissolvability, the hardness can be negatively affected.
The change in hardness can be measured with a quarter cone penetrometer.
Opal may have similar forms, but its lower hardness can distinguish it.
The value of the hardness can be entered without a correction in the following situations.
On the other hand, tablets with a high level of hardness can withstand a greater ejection force.
Water hardness can reduce glyphosate effectiveness as can the use of high water volumes.
However, only optical properties and hardness can truly distinguish these two gemstones.
This hardness can then be conventionally modified using a quenching and tempering processing operation.
Note, Other methods of determining hardness can be agreed.
The classification of water hardness can be carried out in accordance with the following parameters.
If gross cracking is not a factor then a higher working hardness can be utilized +2 HRC.
The total hardness can be calculated from the amount of EDTA that has been used.
The key to TPU 's versatility is that its hardness can be highly customized.
Durometer hardness can be described by the Shore A hardness scale.
