Examples of 'have a hardness' in a sentence
Meaning of "have a hardness"
This phrase suggests that something possesses a certain level of resistance or firmness. It implies that the object or material is not easily bent, broken, or deformed
How to use "have a hardness" in a sentence
Basic
Advanced
have a hardness
As the pellets have a hardness of only approx.
They are obtained by the double compression technique and have a hardness of 3 kg.
Rubies are used because they have a hardness on the mohs scale similar to diamonds.
The tablets manufactured in accordance with the present invention have a hardness of less than 100N.
These residues have a hardness greater than that of the constituent material of the moulds.
Tablets intended for such packaging preferably have a hardness of about 3 kp or more.
The sealant should have a hardness sufficient to provide lasting protection against environmental contaminants.
The anti-skid materials used by powder spraying shall have a hardness higher than 4 Mohs.
The material used should have a hardness lower than that of the cathode material.
Once the Ceramic Pro has cured, it is measured to have a hardness of over 9h.
The compositions have a hardness which provides both easy disintegration and good stick adhesion.
The polyurethanes of the present invention have a hardness generally 98 Shore A or less.
Diamonds have a hardness of 10, making them one of the hardest materials.
Preferably, the pasty fatty substances have a hardness of less than or equal to 6 MPa.
Corals have a hardness of only 3.5 they are much softer than any other gemstone material.
See also
Thus, the balls should preferably have a hardness at least as great as mild steel.
Rubies have a hardness of 9.0 on the Mohs scale of mineral hardness.
Most preferably, the strips have a hardness of about fifty Newtons.
The tablets only have a hardness of only 36 N and show sporadic tendency to capping.
Generally, this requires the extruded wire pre-product to have a hardness of about 80 Shore A or higher.
The wire should have a hardness preferably of at least Brite Basic wire.
However, it is not uncommon for water sources to have a hardness in excess of 150 ppm.
This layer can also have a hardness between about fifty and eighty Newtons.
A composition according to claim 4 wherein the tablet cores have a hardness of from 10 to 70 N.
Typically, soft panned coatings have a hardness rating below the rating of hard panned coatings.
Diamonds are one of the hardest known materials, as they have a hardness of approximately 8,000 HV.
Enstatite gemstones have a hardness of 5.5 and a vitreous luster when polished.
Chamfered corners with reduction ratio of more than 7 % have a hardness of more than Hv360.
The most preferred particles have a hardness of at least 18 and more preferably at least 20 GPa.
Products after heat shock were found to have a hardness of 45 g with a standard deviation of 3 g.
These tablets have a hardness of about 40 N and produce an unpleasant, gritty mouthfeel.
Typical security tacks in use today have a hardness of approximately RC 40.
These balls 12 have a hardness higher than that of the active component 14, and are preferably metallic.
Preferably, the abrasive particles have a hardness of 6 Mohs or greater.
The wire can have a hardness higher than 40 HRC.
Most preferably, the tablet will have a hardness of about 35 Newtons.
All inPHInium discs have a hardness of 55-2 HRc and surpass the ball test.
In other embodiments, the foam strip 26 can have a hardness of less than sixtyfive Newtons.
The tubes shall have a hardness test, it is not exceeding 72HRB.
Thus, the water in the tub will have a hardness degree of about 7 ° F.
The soft rail 15S may have a hardness lower than about 58 HRC and preferably below about 50 HRC.
According to an embodiment the sealing means have a hardness comprised between 40 and 80 shore A.
The body was found to have a hardness of 40A as measured by a durometer.
In still further implementations the binder can have a hardness between about 80 HRB and about 95 HRB.
Said kinetic mixing particles have a hardness of at least 2.5 on the Mohs hardness scale.
Such a material would typically have a hardness Shore A of 80 or greater.
More preferably, the strips 26 have a hardness between forty Newtons and fifty-five Newtons.
In further implementations the binder can have a hardness between about 75 HRB and about 20 HRC.
Both types of birch have a hardness of 4 on a scale of 1 to 5.
The resulting tablets are monolithic and have a hardness in the range of 15 kP to 33 kP.
You'll also be interested in:
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
Examples of using Have
Show more
These documents have been in my family for centuries
Have this done by the customer service only
He could not have chosen a worse time
