Examples of 'head screwdriver' in a sentence
Meaning of "head screwdriver"
A head screwdriver is a type of tool used to tighten or loosen screws. It has a flat tip that fits into the slotted head of a screw, allowing for rotational force to be applied when turning the screwdriver
How to use "head screwdriver" in a sentence
Basic
Advanced
head screwdriver
Use a flat head screwdriver to push the.
Remove skid by using a phillips head screwdriver.
Use a cross head screwdriver to remove.
I only necessary a regular phillips head screwdriver.
Phillips head screwdriver in the toolbox.
Remove using a flat head screwdriver.
Phillips head screwdriver not included.
Open lamp head with a phillips head screwdriver.
Six inch flat head screwdriver with a flare tip.
Remove the worn seals using a flat head screwdriver or.
Use a fl at head screwdriver to remove te pin from the top bracket.
Replace the fuse cover using a slot head screwdriver.
Insert a phillips head screwdriver into the antenna screw slot.
Adjust the indicator accordingly by using a phillips head screwdriver.
Have a straight head screwdriver to hand.
See also
Loosen the top hinge screws using a phillips head screwdriver.
Clutch head screwdriver.
Turn the setting screw with a cross head screwdriver.
You must use a flat head screwdriver to turn the cams.
I am gonna need a set of allen wrenches and a phillips head screwdriver.
Remove skid by using a phillips head screwdriver and an adjustable wrench.
Replace battery door and secure with small philips head screwdriver.
You will need a flat head screwdriver or you can turn it by hand.
The shocks are adjustable at the shock tower by using a flat head screwdriver.
Use a flat head screwdriver to open the battery pack and remove battery.
Remove the worn seal using a flat head screwdriver or punch.
Using a small cross head screwdriver remove the screw inside the hairpocket.
Push gently on the switch with a flat head screwdriver to set it.
With a flat head screwdriver wedge the fuse hold out of its housing.
The vacuum tubes can be installed on the blower using a flat head screwdriver.
The screws were inserted with a hex head screwdriver adapted to a calibrated torque meter.
Secure each clip to the safety grille body by using a philips head screwdriver.
Turn the antenna screw with the phillips head screwdriver clockwise to attach and tighten.
Pry the upper housing from the product with a flat head screwdriver.
Use a flat head screwdriver to push the seal head tab under the retaining ring.
The alkaline batteries must be removed to access the instrument core with a flat head screwdriver.
Use a flat head screwdriver to adjust the gap between the rubber handle and the cover.
Place the meter face down and loosen the battery cover screw with a flat head screwdriver.
Use a Phillips head screwdriver to open the compartment door.
You will need a medium size Phillips head screwdriver.
Use a Phillips head screwdriver to remove the cover plate.
The only tool required is a small Phillips head screwdriver.
A Phillips head screwdriver is the only tool you need.
Then tighten all screws securely with a Phillips head screwdriver.
Use a small Philips head screwdriver to remove the housing screws.
Tighten all the clamp screws with a Phillips head screwdriver.
Insert a rod or Phillips head screwdriver through the small hole.
Lossen the top hinge screws using a Phillips head screwdriver.
A small Phillips head screwdriver is required to open the battery compartment.
Open door on back of the unit using a Philips head screwdriver.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
