Examples of 'head tube' in a sentence
Meaning of "head tube"
In the context of bicycles, the head tube refers to the part of the frame where the front fork and handlebars are attached. It is a crucial component that provides stability and control to the rider. The head tube angle and length can affect the bike's handling characteristics and overall riding experience
Show more definitions
- The part of a tubular bicycle's frame in which the front fork steerer tube is mounted.
How to use "head tube" in a sentence
Basic
Advanced
head tube
The cup is gimbaled to the head tube.
Make sure inner head tube is tight in cable connector.
Drop the fork out of the caster head tube.
The head tube has a chamber and two openings.
The frame can include a top tube and a head tube.
Chromed head tube lugs.
Head tube nipple.
This spring can be a simple torsion bar placed in the head tube.
The head tube light can not be used in this mode.
The cup is configured to rotate relative to the head tube in a longitudinal plane.
The head tube angle is the angle the head tube makes with the ground.
Enter at the hole on the head tube and exit at the bottom bracket.
The steering axis angle usually matches the angle of the head tube.
The top tube usually extends from the head tube rearward to the seat tube.
Tighten the nut where the handlebar stem meets the head tube.
See also
Headset The bearing system in the head tube within which the handlebars rotate.
The bottom tube can have a first end connected to the head tube.
Steering system Head tube solution.
The upper frame member extends between a dropout associated with a rear wheel and a head tube.
The tapered head tube with an over-sized lower bearing of.
Push fork shaft through the steering head tube until the stop.
Said holes in the head tube are closed by plugs to seal them ;.
The top tube has a first end connected to a head tube and a second end.
This head tube 5 is formed in a tilted position appropriate to a caster angle.
The top tube includes a first end that is connected to a head tube and a second end.
At the upper end of the head tube an annular bearing 5a is arranged.
The upper frame member can extend between a dropout associated with a rear wheel and a head tube.
The head tube contains the headset, the interface with the fork.
Frame identification code A is stamped on the right side of the steering head tube.
The head tube 3 has a pair of extendible and contractible front forks 4 rotatably attached thereto.
Frame identification data A are stamped on the right side of the steering head tube.
Frame Stack, Reach and Head tube length are the three important features that changed.
At the front end the frame has a head tube 5.
The head tube 4 rotatably holds a steering shaft 6.
A head badge is a manufacturer's or brand logo affixed to the head tube of a bicycle.
The head tube 3 rotatably supports a front fork 4.
The headlight of the Lync system is in the head tube Figure 7.
A head tube 5 is disposed at a front end of the main frame 3.
A steering shaft 4 is inserted in the head tube 3.
A head tube 5 is disposed at a front end of the body frame 3.
Jumps etc . on the head tube.
The cone-shaped head tube 5 can be made in metal or in polyethylene.
The seat 3 is disposed behind the head tube 7.
A head tube 3 is disposed in an upper front portion of the body frame 2.
A front fork 6 is rotatably supported on the head tube 2.
The head tube 5 has a steering shaft 7 rotatably extending therethrough.
A steering shaft 4 is inserted into the head tube 3.
A head tube 4 is fixed to the front end of the body frame 3.
The vehicle body frame 2 extends rearward from the head tube 8.
A head tube 3 is provided at an upper front end of the main frame 2.
