Examples of 'headunit' in a sentence
Meaning of "headunit"
headunit (noun): Headunit refers to the main control center or display unit in a vehicle's dashboard, typically used for controlling the car's audio, navigation, and other systems
How to use "headunit" in a sentence
Basic
Advanced
headunit
Frequency when the headunit is in tuner mode.
Headunit reloaded emulator for android auto.
Quency when the headunit is in tuner mode.
The input sensitivity can be adjusted to any headunit.
Connect the headunit directly to input of the device.
The treble controller on the headunit is turned up.
Turn the headunit on with the volume set to minimum.
Observe therefor the operation manual of your headunit.
Then reduce the headunit volume to just below the point of distortion onset.
Hereby the amplifier turns on or off with your headunit.
No signal from the headunit Check head unit settings.
Thereby the amplifier will turn on or off automatically with your headunit.
The right headunit.
Wire the remote connections to the auto start lead of your Headunit.
But then the FADER function of the headunit does not work anymore.
See also
The M-Zone volume can not be adjusted by the headunit.
Turn off the headunit when jump-starting the car.
Bypass any and all electrical components between the headunit and the amplifiers.
When the headunit is turned off, the amplifier turns off automatically.
Bypass any and all electrical components between the headunit and the device.
As soon as the headunit will be turned off, the amplifier turns also automatically off.
Verify good RCA input connections at headunit and device.
When the headunit is in standby mode, inserting a disc will turn the the headunit on.
Make sure your phone is connected to the headunit by Bluetooth.
The headunit does not memorize that the M-Zone has been activated after shutting off.
This makes it possible to operate it with an OEM headunit and OEM.
This headunit is compatible with CD-changer made by SANYO.
The balance or fader controller of the headunit is not in the zero-position.
Turn down ( counterclock wise ) all three input gain level potentiometers and turn on your headunit.
This headunit is fully NTSC / PAL compliant.
Verify quality connections for both cables at device, headunit and battery / fuseholder.
If your headunit provides only one RCA jack, use a y-connector.
If there is only one RCA stereo audio cable from the headunit available, connect.
REMOTE, Connect the remote terminal to the remote output of your headunit.
If a separate SUB OUT from your headunit is available, use this as LINE OUT.
Compatible DVB-T and DAB+ devices offer direct operation via touchscreen of the headunit.
Then connect the remote turn-on-wire from the headunit with the amplifier 's REM terminal.
The highlight of the event was the ' GKUI ' headunit.
Connect the stereo RCA output of the headunit with LINE INPUTS CH1/2 of the amplifier.
In DVD mode, ejecting a loaded disc will automatically put the headunit into tuner mode.
Channel Full Range Stereo System using aftermarket headunit with ( low level ) RCA 's.
