Examples of 'heat block' in a sentence
Meaning of "heat block"
heat block ~ is a term commonly used in scientific or laboratory settings. It refers to a device or equipment designed to prevent the transfer of heat between two substances or to provide a controlled heating environment for specific applications. Heat blocks are often used in experiments or procedures that require precise temperature control
How to use "heat block" in a sentence
Basic
Advanced
heat block
Heat in water bath or dry heat block.
A fixed thermostat on the heat block maintains heat block temperature.
Scrape this skin toward the heat block.
The adhesive is melted by the heat block and pushed out through the tip.
Care should be taken to avoid direct contact with the heat block.
The paddle was returned to the heat block and blotted as before.
Thumb pressure on the feeder pushes the adhesive stick into the heat block.
The paddle was removed from the heat block and excess reagent was tapped off.
Gently press the feeder forward and push the adhesive into the heat block.
In the heat block of FIG.
The vial is then removed from the heat block and cooled.
Gently wipe heat block chamber with a dry Foam Swab.
Remove the reconstituted doxorubicin HCl vial from the water bath or dry heat block.
A thermocycler currently available uses a heat block capable of holding up to 48 reaction tubes.
The sample withdrawn for HPLC analysis was dried on the heat block.
See also
The heat block and autoclave were agitated on a vibration table for 16 hours at room temperature.
Verify the temperature set point by checking the thermometer ( s ) on each heat block insert.
The heat block was then held at a 4°C soak cycle.
Each of the vessels is provided with a thermoregulator, for example a heat block provided with a thermostat.
Place RNAs in a 90 °C heat block then remove block from heater and cool on bench.
The mixtures were put on a 94 degree Celsius heat block for 3 minutes.
Contamination of the heat block may be DNA Sourced, or non-DNA Sourced.
They were then transferred to a 55 degree Celsius heat block for at least 2 hours.
Gently wipe heat block chamber with a Foam Swab moistened with 70 % Alcohol.
Furthermore, although the heat block shown in FIG.
The reaction mixture was added to 200 µl of PBS and heated on a heat block.
The sample can be heated at 60/C in a heat block and vortex to dissolve if necessary.
Preparation of the Magnetic Beads SureSelect Wash Buffer 2 was prewarmed at 65 °C in the heat block.
The tubes were transferred to a heat block maintained at 37°C while taking signal readings.
Step 3. Heat in water bath or dry heat block.
Heat these on the heat block for 10 min.
The heat block then went to a 4°C soak cycle.
Those mixtures were heated to 60 °C on heat block overnight.
The tube was heated in a heat block at 125C to drive off the water.
The sample was then heated at 99°C for 5 minutes on a heat block.
The plates were incubated at 37°C on a heat block for 15 minutes with occasional agitation.
The inoculated test paddle was then placed on a heat block at 37°C.
After bead milling, samples were transferred to a heat block set at 37°C and incubated for 20 minutes.
The dark red solution was then heated vía heat block pre-heated to 65 °C.
The plate was then covered and warmed on a heat block for 5 minutes at 37 °C.
Incubate at 65 ° C for 2 minutes in a heat block then cool on ice.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Block
Show more
Never block the air inlet grille
Each electrical circuit corresponds to a track block
Use a wooden block to prevent the blade
