Examples of 'heat deflection' in a sentence
Meaning of "heat deflection"
heat deflection: This term refers to the ability of a material or surface to redirect or dissipate heat away from a specific area, often to prevent damage or maintain thermal comfort
How to use "heat deflection" in a sentence
Basic
Advanced
heat deflection
They also often possess advantageously high heat deflection temperatures.
During this process the heat deflection temperature of the material also increases.
The continuous use temperature is generally slightly lower than the heat deflection temperature.
Heat Deflection Temperature The heat deflection temperature is measured according to ISO 78.
Biodegradable polymer composition for the manufacture of articles having a high heat deflection temperature.
Heat deflection temperature was measured on unannealed samples and under 264 psi load.
Biodegradable polymeric composition for preparing articles having high heat deflection temperature comprising,.
At the same time, the heat deflection temperature, measured vía HDT, decreases.
The novel polymer composition shows high stiffness, impact strength and heat deflection temperature.
Figure 2 provides heat deflection temperatures plotted against content of SSC-produced polyethylene in polypropylene for Examples 1 - 8.
ASTM-rated for increased impact strength and higher heat deflection temperature.
The average heat deflection temperature for Inventive Formulations 1-6 are provided in Table 1.
Preferably, the elastomer is PEBAX or Pellethane due to processability and high heat deflection temperatures.
Heat deflection temperatures were determined using the procedure of ASTM D-648.
The glass reinforcing fibers Improve the modulus, strength and heat deflection temperature of the composite.
See also
These may include thermal expansion coefficient, heat deflection temperature, vicat softening point, etc.
Typical uses include electronic packaging, housing. etc. The heat deflection temperature is 290oC.
The articles will also show an excellent heat deflection temperature of more than 50 °C.
It is required that the polyamide shall have a heat deflection temperature ( HDT ) above 50°C.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Deflection
Show more
S spring deflection between laden and unladen
Check sling hooks for wear or deflection
The deflection travel is limited by a plastics sleeve
