Examples of 'heat input' in a sentence
Meaning of "heat input"
Heat input refers to the amount of heat energy supplied to a system or process. It is typically measured in terms of power input per unit of time, such as kilowatts or British thermal units per hour. In the context of thermodynamics or engineering, heat input is an important parameter for calculating energy transfer and efficiency
How to use "heat input" in a sentence
Basic
Advanced
heat input
Is the cumulative heat input of the heater kJ.
Heat input liquid vapour heat output.
General effects of heat input on a welded joint.
Use appropriate parameters and heat input.
Low heat input for low dilution.
The process of change is facilitated by a heat input.
Fuel or heat input is one benchmark approach.
Parameters combinations are linked to a heat input coefficient.
Higher heat input suitable for heavy sections.
There are two sources of heat input.
The effects of heat input on weldability.
Heat input is calculated according to the formula below.
Estimating a suitable heat input and preheating temperature.
Safe procedure through the avoidance of heat input.
A low heat input may also be used in combination.
See also
Balancing the challenges of heat input.
It will reduce the heat input with a softer arc.
Heat input to a wexel affects the movement of nearby particles.
No external heat input is required.
If you are very close to the sun or heat input next.
Welding with low heat input provides benefits like these.
With an average color reproduction and medium heat input.
Control the heat input and size of the molten pool.
Insufficient arc gap for the material or the heat input.
In general low heat input supports high strength in the joint.
This technique helps to reduce the heat input to the weld.
No heat input effects can be observed in the case of the welds.
This lowers the average heat input per unit of time.
The heat input is the molten polymer injected at regular intervals.
The temperature is regulated by heat input from electrical coil heaters.
Low heat input allows the molten pool to freeze quickly.
Reduces heat input.
The test procedure was as follows using different heat input rates.
In the ColdMIG process the heat input is again drastically reduced.
This reforming reaction is highly endothermic and requires heat input.
Nominal heat input.
Heat input in welding and welding energy and other welding variables.
This increases the average heat input per unit of time.
No distortion or warping on flexible and thin materials due to low heat input.
The reason is the ambient heat input through the acrylic dome.
External hot gases are sometimes recovered and used as an additional heat input.
But vaporisation requires heat input equal to the latent heat of vaporisation.
Preferably the catalyst separation section comprises means for heat input.
Coolant supply is improved and heat input into the workpiece is drastically reduced.
Heat input needs to be controlled to prevent thermal degradation while plasticizing the material.
In normal operations the demand for heat input is adjusted to meet production requirements.
Heat input is by falling film type reboiler driven by steam or other heating medium.
This represents approximately the current heat input for the reference period.
The temperature drops again in the mesosphere in the absence of a significant heat input.
Welding with the recommended heat input results in good mechanical properties in the joint.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Input
Show more
Do not use damaged input or welding cables
The input and output pairs are parallel
Select the desired input source correctly
