Examples of 'heat load' in a sentence
Meaning of "heat load"
Heat load refers to the amount of thermal energy or heat that needs to be removed or dissipated from a specific area or system. It is a measure of the cooling or heating capacity required to maintain desired temperature levels in a given space, such as a building, industrial process, or electronic equipment
How to use "heat load" in a sentence
Basic
Advanced
heat load
Many factors go into heat load calculations.
The heat load to the reactor walls was reduced.
Thermal scopes show a huge heat load.
Maintain sufficient heat load on the process fluid.
Setting of the reference heat load.
Coil of the heat load contactor.
Do not operate the tower without a heat load.
The intense heat load on and at high humidity.
That was affecting our heat load.
This is called heat load calculations.
The last consideration is the type of heat load.
The intense heat load leads to stratification of the coolant.
Understanding the process is essential to calculating an accurate heat load.
The heat load needed for the evaporation is considerable.
Check the application heat load at the design condition.
See also
All materials must get used to the heat load.
Required heat output heat load x n of occuring hours per year.
A system of circulating fluid was used to distribute the heat load.
Latent heat load.
This type of expansion device is insufficient at a low heat load.
Design heat load.
The total loading is constrained by criticality limits and heat load.
Also the heat load on the exit diffusor is very high.
Indoor airflow characteristics under increased heat load conditions.
The heat load for each individual room can vary considerably.
Accident condition heat load.
This minimizes the heat load and maximizes the time for intervention.
Based on the heat load.
Heat load is one of the important indexes in the design of electric heating elements.
Lower temperature of exhaust gases causing lower heat load of engine.
The heat load is unstable and will change with the production cycle.
Sensible heat load.
The backup heater will automatically take over the heat load.
There are several ways to determine the heat load depending on the application.
The heat load applied to the coolant is typically sufficient to vaporize the coolant.
A set of streams can be represented as a function of heat load against temperature.
The mine heat load also depends on the refrigeration and air cooling tactics.
The applicability may be limited in the case of low heat load demand.
Most of the heat load on the cooling water comes from removal of sensible heat.
Energy efficiency improvement potential in a paper mill by means of heat load balancing.
They can transport a large heat load over a long distance with a small temperature difference.
Your prospective contractor should produce a sample of his heat load calculations.
This might increase the total engine heat load or decrease the possible motor performance.
Properly size the hot water storage tank to match the heat load.
The choice will be a compromise between heat load to the cold space and signal attenuation.
Passing refrigeration from the very cold temperature working fluid to a heat load.
They are thermally insulated to reduce the heat load on the stored articles.
Rest periods should be extended to alleviate the increase in the body heat load.
The load distribution means has a heat load circuit and a flow rate regulation mechanism.
The other major method for saving energy was the heat load prediction.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
