Examples of 'heat rejection' in a sentence
Meaning of "heat rejection"
Heat rejection refers to the process of removing or dissipating excess heat from a system or an object. This is often done through mechanisms such as cooling, ventilation, or thermal insulation, in order to maintain optimal operating conditions and prevent damage or overheating
How to use "heat rejection" in a sentence
Basic
Advanced
heat rejection
This improves heat rejection characteristics.
This provides for more efficient heat rejection.
During the heat rejection and absorption processes.
Engine fluids and heat rejection.
Outstanding heat rejection and glare reduction for added comfort.
Vehicle refrigeration equipment having a liquid heat rejection system.
Reduced heat rejection.
The maximum temperature indicates the maximum amount of heat rejection.
Superior heat rejection.
The gas is conducted from the compressor through pipes to the heat rejection device.
Unmatched combination of high heat rejection and visible light transmission.
Fresh air is taken in, in place of the heat rejection.
Superior heat rejection and glare reduction for added comfort.
The condenser may be any type of known heat rejection device.
It follows that less heat rejection from the system means less cooling is required.
See also
In addition to reduced electrical output this resistance can impede heat rejection from the device.
Final heat rejection was through a water-cooled condenser.
The process continues to provide heat rejection to the external environment.
Once again, a lower coefficient will mean better heat rejection.
There is no heat rejection on the reforming process side in example 2.
The supercritical fluid may undergo cooling in a heat rejection phase in a heat exchanger.
Substantial heat rejection provides energy savings and enhanced comfort, combined with a clear film.
Again, a lower number means better heat rejection.
Refrigerant passes from the heat rejection heat exchanger to the separator inlet ;.
In a basic refrigerant system, a compressor compresses a refrigerant and delivers it to a heat rejection heat exchanger.
This is because the same heat rejection level can be achieved with a smaller-sized core.
This property is required in order to maximise heat rejection during re-entry.
Conversely, heat rejection decreases a subsonic Mach number and increases a supersonic Mach number along the duct.
The two compression chambers compress refrigerant and deliver it downstream to a heat rejection exchanger 28.
A heat rejection heat exchanger ( 30 ) coupled to the compressor to receive refrigerant compressed by the compressor ;.
Film perfectly suited for customers who required a reduction of glare, privacy and heat rejection.
The arrow Q ' indicates the heat rejection of the system.
The N / S panels can be thermally coupled to reduce temperature fluctuations and improve heat rejection.
The plot from C to D represents heat rejection to the regenerator 5.
A dual-level heat rejection system enabled separate removal of high - and low-temperature heat.
To develop BlueStream, Johnson Controls combined the best technologies in the heat rejection industry.
A system according to claim 12, wherein the heat rejection means expels waste heat from the system.
The process consists of three major sections, heat input, heat recovery, and heat rejection.
The heat rejection from a reciprocating compressor normally is 8-10 % of the total heat rejection.
The condenser 22 is coupled to an appropriate external heat rejection system ( not shown ).
Downstream of the heat rejection heat exchanger 26, the refrigerant passes through an expansion device 60.
The refrigerant compressed by the compressor bank 52 is delivered to a heat rejection heat exchanger 26.
This is shown schematically in Figure 1 as a heat rejection portion 27 and a heat gaining portion 28.
Here we find the same qualities as the Variochromic 20 with only 1 % loss of heat rejection.
In other words Process 4-1 is [ Constant pressure heat rejection in condenser ].
Finally, process 4-1 represents the constant volume heat rejection process.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Rejection
Show more
Repeated rejection of proposals for maternity insurance
Else it recommends the rejection of the petition
Rejection of such proposals or observations must be reasoned
