Examples of 'heat seal' in a sentence
Meaning of "heat seal"
Heat sealing is a process used in packaging and manufacturing industries to create a secure, airtight, or tamper-proof seal using heat. The phrase 'heat seal' refers to the act of sealing or joining two materials, usually plastic films or sheets, by applying heat to melt the surfaces together. This method is commonly used in packaging products, such as bags, pouches, and blister packs, to ensure freshness and product integrity
How to use "heat seal" in a sentence
Basic
Advanced
heat seal
You can heat seal it with an iron.
Nearly done with the heat seal.
Heat seal conditions are described below in detail.
The bag botton will be a heat seal.
Heat seal the heat pack together.
The bag bottom will be a heat seal.
The heat seal time is a fraction of a second.
The innermost layer is possible to heat seal.
A heat seal could work with enough power.
The closure flaps are bonded together by heat seal.
Heat seal coating one side.
The skirt is outward of the second heat seal.
The upper heat seal portion includes a hole.
This still enables formation of an effective heat seal.
A heat seal can be a frangible seal or a hard seal.
See also
The terpolymers have excellent heat seal characteristics.
It may be of a heat seal adhesive such as polyvinylacetate copolymer.
It is concentric to and outwardly of the first heat seal.
Heat seal and spin again.
Stonepaper heat seal bags.
Heat sealed packages tend to fail at or close to a heat seal.
Skin layers such as heat seal layers may be present.
The heat seal tests were performed utilizing a heat sealer.
The vacuum chamber may include a heat seal assembly.
Three to five heat seal tests were made and tested.
The above films had coextruded heat seal layers.
Test heat seal materials were sealed over the hole.
The bag bottom will be a curved or straight heat seal.
The heat seal and the substrates are vapor impermeable.
All of these variables interact in completing a successful heat seal.
The heat seal layer may be either clear or opaque.
In this way a good longitudinal heat seal can be made.
Heat seal temperature control.
After filling the bottom is sealed by a crimp heat seal.
Process heat seal.
The seal or bond may be an adhesive bond or a heat seal.
Heat seal number.
This sealing process can be accomplished by utilizing a heat seal.
Heat seal coating.
Such a layer provides enhanced heat seal properties to the film.
The heat seal temperature was measured in the same way as above.
A commercially available acrylic heat seal layer is applied to one side.
The heat seal is around the periphery of the tray member.
Long plastic stretcher prior to heat seal formation and measurement.
The second layer is formulated and positioned to form a heat seal.
Simply raise the heat seal temperature to solve the problem.
The product contact material is the polyethylene heat seal layer.
Two mandrels are used to heat seal fitments to the flexible containers.
This latter characteristic is usually termed the heat seal strength.
There is only a single heat seal shown in the patented device.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Seal
Show more
And in so doing seal a bond of enduring friendship between us
Please verify that the seal is unbroken
Seal tightly and allow to stand overnight
