Examples of 'height of cut' in a sentence
Meaning of "height of cut"
This phrase is typically used in reference to lawn care or gardening, specifically when determining the desired length at which grass or plants should be trimmed. It indicates the level or height at which the cutting equipment or tools should be set to achieve the desired aesthetic or functional outcome
How to use "height of cut" in a sentence
Basic
Advanced
height of cut
Height of cut is adjusted by raising or lowering the.
Select desired height of cut with attach.
Height of cut ranges for roller adjustment.
Check the height of cut settings.
Reposition the bolt for required height of cut.
Raisethe height of cut if the grass is high.
Allow motor to cool and increase height of cut.
The height of cut is altered by pulling the adjustment.
Move the lift lever to a height of cut position.
See height of cut chart below.
All wheels will be in the same height of cut.
The height of cut adjusted as follows.
Equally to the required height of cut.
Adjust height of cut with height adjust levers.
The procedure for adjusting the height of cut is as follows.
See also
A medium height of cut is recommended for most lawns.
Use the lift lever to change the height of cut.
To change height of cut start on one side of cutterdeck.
Increase the height of cut.
Install height of cut pins in correct set of holes.
Check the height of the grass and adjust the height of cut.
Set the height of cut for the grass.
Make sure all cutting units are adjusted to the same height of cut.
Height of cut is adjusted by raising or lowering the four wheels.
Move the lever towards the front of the appliance to raise the height of cut.
Height of cut is adjusted by turning over the cutting head.
Always stop the engine before removing the grasscatcher or adjusting the height of cut.
Select desired height of cut with attachment lift lever.
The cutting performance depends on the type of grass and the height of cut selected.
The height of cut can be adjusted in any conventional manner.
Always stop the mower before removing the grass catcher or adjusting the height of cut.
The height of cut is adjusted by changing the height of the wheels.
Grass too high Increase height of cut and walk slower.
The height of cut is adjusted by the central height adjust mechanism.
Mower in long grass Increase height of cut and tilt mower.
Increase the height of cut and move machine to shorter grass to start.
Motor protector has activated Allow to cool for a few minutes and increase height of cut.
Set the height of cut on the front tip of the center blade.
Adjust cutting height as explained in the Height of Cut section.
The actual height of cut grass will vary with lawn and soil conditions.
In long grass or uneven ground, the height of cut.
Fourteen height of cut positions which provides the flexibility to deal with most grass conditions.
Remove pin C and set the height of cut lever D to that height.
Five height of cut positions which provides the flexibility to deal with most grass conditions.
Loosen the jam nuts on the height of cut clips and adjusting screws E.
Remove height of cut pins from front deck and carefully lift deck to a perpendicular position.
Replace the cutting head, adjusting the height of cut.
Height of cut is adjusted by raising or lowering the Front and Rear wheels.
Allow motor to cool and activated . increase height of cut.
Height of Cut not adjusted correctly.
