Examples of 'height setting' in a sentence
Meaning of "height setting"
height setting: This phrase usually refers to an adjustable option on equipment or furniture to determine the elevation or level above the ground or base
How to use "height setting" in a sentence
Basic
Advanced
height setting
Set the cutting height setting to an intermediate.
Raise the deck to a higher cutting height setting.
Note the back height setting before disassembly.
Set the wheels to the desired height setting.
The pile height setting is shown in the window.
Crank for cutting height setting.
Each height setting is easily controlled via a lever.
Lower the brush height setting.
Ceiling height setting is only available for certain models.
Raise the brush height setting.
Select a pile height setting by pressing the small pedal on the rear.
Bolts secure the height setting.
The height setting is stored in combination with the memory function for the seats.
Select a pile height setting by pressing.
Lower the machine to its lowest cutting height setting.
See also
Check the height setting for the mower.
Set the wheels to the desired height setting with the.
Nozzle height setting plate.
Make sure the fence is properly locked at the desired height setting.
Nozzle height setting device.
Place the deck lift lever in the desired mowing height setting.
Mow with a high cutting height setting the first time.
The deck lift pedal in the normally desired mowing height setting.
Select a higher cutting height setting if the motor is difficult to start.
The mower may become difficult to push if the height setting is too low.
Set the cutting height setting to the maximum cutting height.
Screw the grass height selector to the lowest mowed grass height setting.
Use the lowest cutting height setting only on level lawns.
Its large reception field and the numerical display enables a highly comfortable height setting.
The pointer will indicate the height setting for cutting your lawn.
Turn off the switch and unplug the cleaner before changing the cleaner height setting.
The pointer will give you the height setting for cutting your lawn.
Incorrect height adjustment Adjust to correct height setting.
Tap the scales base after the height setting of the given person appears on display.
The AHHC will automatically lower header to selected height setting.
This registers an initial height setting that provides information for subsequent helical scan execution.
Use the holes that provide the correct height setting for the user.
Cutting height setting The required cutting height is set with the aid of the wheel.
Lower the mower deck to the desired height setting using the lift handle.
Release the height setting switch D and make sure that the tube clicks into place.
If the brush height was too low, raise the brush height setting.
The Paper Height setting specifies the height that the text will display in paper space.
If the speed drops, select a higher cutting height setting and / or reduce the rate of feed.
The Paper Height setting specifies the height of the text in paper space.
To reselect units, press and hold the Light button in weight or height setting display.
To adjust the height setting figure H.
Height setting of the KLIPPO lawn-mowers when mowing edges or trimming.
Moreover, a respective adjusted height setting is maintained by the damper installation.
If applicable repeat steps 15 and 16 for fine adjustment of the precise height setting.
The chosen height setting is indicated by the front detent 3.
You'll also be interested in:
Examples of using Height
Show more
Height and weight are about the same
The armrest can be height adjusted as follows
Height and depth adjustable steering wheel
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
