Examples of 'held at this temperature' in a sentence
Meaning of "held at this temperature"
held at this temperature: This phrase is used to describe the specific temperature at which something is maintained or kept. It is often used in scientific contexts or when giving instructions for handling objects that require a controlled temperature environment
How to use "held at this temperature" in a sentence
Basic
Advanced
held at this temperature
The system was held at this temperature for a further two hours.
The reaction mixture was brought to reflux and held at this temperature overnight.
The sweet wort is held at this temperature for approximately one hour.
The reaction temperature was then dropped to 37°C and held at this temperature.
The mixture was then held at this temperature for four hours.
During this addition, the temperature increased to 82°C and was held at this temperature.
The reactor was then held at this temperature for approximately one hour.
The solution was warmed to 45°C and held at this temperature.
It is held at this temperature for one hour before cooling back to room temperature.
The reaction medium is then held at this temperature for about 90 minutes.
The sample was held at this temperature for 15 minutes to insure thermal equilibrium.
The resulting pale orange solution was held at this temperature for 10 minutes.
The mixture was held at this temperature and oxygen pressure, while stirring, for 2 additional hours.
The resulting solution is cooled to 0 ° C and held at this temperature for twenty-four hours.
It was then held at this temperature for 30 - 40 seconds in an insulated holding tube.
See also
The substrate heater temperature was set at 700°C and held at this temperature during deposition.
The reaction is then held at this temperature until the epoxy equivalent weight approaches infinity.
The thermocycler is then heated to 74 °C and held at this temperature for 90 s.
The rods were held at this temperature for 2 minutes.
The thermocycler is then heated up to 60 °C and held at this temperature for 15 min.
The reaction mixture was held at this temperature until the epoxy equivalent became constant.
After the reaction mixture temperature reaches 180°C, it is held at this temperature overnight.
The reaction mixture is held at this temperature for only a minute or two.
This dispersion is then heated to 95 ° C. and held at this temperature.
The mixture was held at this temperature for 3 hours.
The solution that was obtained was cooled to 10°C and held at this temperature for 16 hours.
The liquor is held at this temperature and circulated for 3 hours.
The mixture was then cooled to -60°C and held at this temperature during the following operations.
The membrane was held at this temperature and these gas conditions for 3.5 days.
The diluate is warmed to 60°C and held at this temperature for 1 day.
The mixture is held at this temperature for 4 hours while mixing.
The autoclave was heated to 200 °C and then held at this temperature for a period of 2 hours.
The reaction mixture was held at this temperature for 1 hour, this being a heat soaking period.
The reaction mixture cooled to 80°C and was held at this temperature for 8 hours, then cooled.
The specimen was then held at this temperature for a period of 30 minutes before starting irradiation.
Next, the solution was cooled to 0°C and held at this temperature for twenty-four hours.
The cans are held at this temperature for about 65 minutes.
The reactors were held at this temperature for 2 days.
The solution was held at this temperature for 3 hours.
The reaction mixture was held at this temperature for 30 minutes before being dumped.
The reaction mixture was held at this temperature and pressure for a further 5 hours.
The segments were held at this temperature for 30 minutes.
The mixture is held at this temperature for 90 minutes.
The reaction medium is held at this temperature for about 1.5 hours.
The dispersion was held at this temperature for 30 minutes whilst agitated.
The solution was held at this temperature for 3.5 h.
The reaction mixture was held at this temperature until the NCO content was 7.59 %.
The reactor was heated to 85°C and held at this temperature for 5 hours with agitation.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Held
Show more
Regular meetings were held in all the sectors
Was held up this morning shortly after opening
Informal consultations are held prior to formal deliberations
