Examples of 'hexagonal head' in a sentence
Meaning of "hexagonal head"
Hexagonal head usually describes a shape of an object, such as a bolt or screw, that has six sides or angles in its design
How to use "hexagonal head" in a sentence
Basic
Advanced
hexagonal head
Remove the upper hexagonal head screws.
The two hexagonal head screws that secure the flue support system are now accessible.
Remove the middle hexagonal head screws.
Place the hexagonal head of the calibration tool into the hole of the calibration nut.
Place a flat washer on each of the hexagonal head bolts.
New hexagonal head.
Non-rotating torque meters with hexagonal head.
A bolt with a hexagonal head is disclosed.
Figure 4 shows a frontal view of a maxillary implant with interior hexagonal head.
The phage has a hexagonal head and a long tail without a sheath.
A securing means 9 is movable radially of the holder section 3 and includes a bolt with a hexagonal head.
The hinge shaft has a hexagonal head which fits in a cavity in the second hinge part.
The working end ( 14 ) is shown with flats providing a hexagonal head.
The hexagonal head screw has a left-hand thread.
Not later than after every 2nd adjustment the hexagonal head screws must be replaced.
See also
For instance, the hexagonal head 2 can be replaced by a head having another shape.
Screw head type: Hexagonal head.
Hexagonal head with integrated washer for neat appearance when fastening through in-place parts.
A locking plate consists of the plate, two hexagonal head bolts and a wire ( fig . 6 ).
Hexagonal head screw with 8 mm nut.
The fastener comprises a nut 25 having a shoulder and a tapped bore, co-operating with a screw 26 having a hexagonal head.
Thus for example, either a hexagonal head screw or a screw 9 with a rectangular head may be used.
Use a torque of 10 Nm to tighten the hexagonal head screws 6.
By tightening the hexagonal head of bolt 16 the device is immobilized.
The hexagonal head 162 is adapted and configured for interaction with a wrench or similar work implement.
The flange 5 and hexagonal head 6 define between them a channel.
The nut or hexagonal head 7 is used to adjust the tension of said cables 3 and 3 '.
Release the hexagonal head screws ( 6 ) with a half turn.
We recommend hexagonal head screws ( DIN 571 ) with corresponding washers and floorplugs.
You'll also be interested in:
Examples of using Hexagonal
Show more
Tighten the hexagonal screws using the
Hexagonal spindle for direct power transmission
Then tighten the hexagonal bolt slightly
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
