Examples of 'high currents' in a sentence
Meaning of "high currents"
High currents refers to the flow of electric current that is greater than the normal or expected level. It indicates a situation where the amount of electrical charge passing through a conductor or circuit is abnormally high. High currents can result in various consequences such as overheating, equipment damage, power loss, or safety hazards. It is often a concern in electrical systems and requires appropriate precautions
How to use "high currents" in a sentence
Basic
Advanced
high currents
High currents therefore flow during operation.
Capability of the battery to supply high currents.
Conducting high currents can produce much heat.
Relays are used in automotive engineering to switch high currents.
The drawbacks due the high currents are avoided.
The invention is particularly adapted to measuring high currents.
At sufficiently high currents an incandescent anode spot may also be formed.
Can deliver very high currents.
There may be very high currents even in small batteries with low capacities.
Electrical connector for passing very high currents.
The sequence nevertheless enables high currents to be interrupted very quickly.
In case of short circuits there may be dangerously high currents.
Such saturation happens at high currents and is not easily detected.
Not to be mounted close to electromagnetic switches or cables carrying high currents.
The static switch can transfer high currents at high speed.
See also
Power contact device with electrodynamic compensation in the presence of high currents.
Especially at high currents.
The elements used are expensive for they are sized so as to receive high currents.
Another technique for passing high currents is to use a fully wired solution.
All of these gave excessive forward voltage drop at high currents.
The magnetic fields created by high currents may affect the operation of pacemakers.
The high conductivity of the pollution layers generates high currents.
The circuit delivers high currents at high voltage levels during short periods.
Components capable of conducting relatively high currents are considered.
High currents and voltages cause interference and electromagnetic noise in the vicinity of the substation.
This problem is particularly critical when high currents are delivered.
High currents can be circulated through the line conductors even when load demand is low.
This is particularly true in areas with high currents and waves.
Magnetic fields created by the high currents in the cutting circuit can affect pacemaker operation.
It is known to protect such a control transistor against high currents in the circuit.
Interrupting High Currents High currents are currents above the previously mentioned threshold value.
It will also protect the starter motor against too high currents.
The transistor is cut off only at high currents flowing in the primary induction coil.
Another solution is to provide an additional power source for supplying these high currents.
These coils are designed to conduct very high currents and to magnetically stimulate the workpiece.
Pacemaker and hearing aid operation can be affected by magnetic fields from high currents.
The invention aims to measure high magnetic fields or high currents using magnetoresistive sensors.
In addition, high currents result in losses of capacity.
This makes fast recharging possible and provides high currents when needed.
Interrupting high currents are short-circuit currents.
The present invention thus applies equally to high currents and to low currents.
Even when high currents are interrupted, continuity of service is assured.
One of the advantages of lithium batteries is that they can deliver very high currents.
Operation to interrupt high currents is as follows,.
The Switch Module is designed for switching DC equipment with high currents.
Consequently, high currents are used to ensure vaporisation of liquid surrounding the electrode.
Assembly of power chips which implies the flow of relatively high currents in some connections.
Under some circumstances, such high currents can damage sensitive integrated circuit chips.
Some known power converters include semiconductor switches capable of handling high currents and voltages.
The poles 7 and 8 are such that high currents can be transmitted at high voltages.
You'll also be interested in:
Examples of using High
Show more
High transaction costs because of required reforms in
Increase access to high quality cancer risk
Use high quality alkaline batteries only
Examples of using Currents
Show more
The currents must have washed it away
Prevention of unfavourable currents and flow conditions
Other currents or configurations may be supplied on request
