Examples of 'high forces' in a sentence
Meaning of "high forces"
high forces: Refers to significant levels of power, strength, or influence exerted in a specific context or situation. This phrase is commonly used in discussions about physics, mechanics, or dynamics to denote strong or intense forces at play
How to use "high forces" in a sentence
Basic
Advanced
high forces
High forces are required to adjust the rollers.
Reliable wear protection at high forces.
High forces are released if the tool jams or catches.
Ensure good alignment when high forces are involved.
Such high forces would damage the filters.
It is useful in applications where high forces are required to line a conduit.
Such high forces can be quite uncomfortable for the patient.
And also whether the products can endure high forces.
Bending can also place high forces on the discs between each vertebra.
The signal can be recovered without requirements for pressure or high forces.
Pressure agglomeration is usually characterised by high forces acting on a mass of a particulate matter.
Another object is to provide a very compact sensor permitting measuring very high forces.
At the end of the active stroke very high forces are typically applied.
High forces are required to separate the atoms and cause the material to stretch elastically.
Such an assembly allows transmission of high forces from the one piece to the other.
See also
They also support functions that involve the teeth and are subjected to high forces.
Heavy bolts are needed due to the high forces acting on the fender during use.
During its lifecycle the artificial turf structure must stand extremely high forces and pressures.
High viscosity medicaments require high forces for expelling them through the relatively thin injection needle.
These shape memory materials can cause large displacements with high forces but they are slow.
The high forces in the collective control were unacceptable ;.
Rubber has the ability to withstand twice as high forces under pressure as under shear.
Furthermore, these connecting means are not suitable to withstand high forces.
High radial stiffness also provides for high forces between the crimped stent and the balloon.
The high forces in the longitudinal cyclic control axis were unacceptable ; and.
Such a material has the further advantage of resisting high forces while having a low density.
In addition, the high forces require high firing wedge forces.
Very compact, producing very high forces.
Due to the high forces applied during treatment, injuries can occur.
Because of the inertia of the rotorcraft, high forces are exerted on the sling.
If comparatively high forces are to be transmitted, the width may also be increased accordingly.
The mechanical structure of this sensor being rigid, it can measure high forces.
This results in the application of high forces instantaneously at contact with the rod 18.
However, high cornering speeds and extreme braking force produce high forces.
Extremely high forces are required to separate the mounted slider 10 from the zipper.
In effect, the sensor produced has great rigidity enabling measurement of high forces.
Caution, this equipment may exert very high forces that could be a source of danger.
Moreover, high forces are necessary for operating the various mechanical systems of the connector.
In one embodiment, the mixture is compressed under relatively high forces to provide a coherent dosage.
These relatively high forces lead to high internal stresses, particularly when the spring is stressed.
During its service life, a crankshaft operates under high forces resulting from fuel combustion.
High forces were recorded on the head, torso, and pelvis of the driver dummy.
This second embodiment resists high forces with a compact size, due to the use of pads.
The support device lies against the holding device, with very high forces being transmitted.
However, as a result, high forces are exerted on the tightening rod.
This is because the contact-type cutting mechanism exerts relatively high forces on the leaflet material.
Further, high-speed processes operating under high forces tend to introduce vibrations and dimensional variability.
For instance, the more advanced maneuvers noted above generally impart high forces on the fin.
The frames described in the ' 781 patent may not be able to resists these high forces.
For angles much greater than 180 °, the knee-joint would require relatively high forces to be unlocked.
You'll also be interested in:
Examples of using High
Show more
High transaction costs because of required reforms in
Increase access to high quality cancer risk
Use high quality alkaline batteries only
Examples of using Forces
Show more
There are no external forces applied on the device
Forces nouvelles revenues from taxation of cocoa
The person who forces you is not me
