Examples of 'higher cutting' in a sentence
Meaning of "higher cutting"
higher cutting ~ a term often used in the context of landscaping or forestry to describe the process of trimming or pruning trees or plants at an elevated level or above ground
How to use "higher cutting" in a sentence
Basic
Advanced
higher cutting
Raise the deck to a higher cutting height setting.
Higher cutting speed than necessary.
If grass is damp a higher cutting level should be chosen.
Higher cutting values are only one side of the coin.
Reduction of processing times due to higher cutting speeds.
Able to run at higher cutting speeds without vibration.
Set the height adjusters at a higher cutting height.
Select a higher cutting height setting if the motor is difficult to start.
New or thick grass may require a higher cutting height.
Mow fi rst at higher cutting height and subsequently at required height.
Considerably reduced cutting time through higher cutting data.
Higher cutting rate.
Significantly higher cutting forces.
A higher cutting height will extend the run time of the battery.
Speed considerably higher cutting.
See also
This enables higher cutting rates and improved surface finish on the work piece.
It is advantageous to set a slightly higher cutting height at the rear axle.
A higher cutting speed generally improves the performance and does not negatively effect tool life.
Modern carbide grades provide higher cutting speeds compared to HSStools.
This development was also accelerated by grinding with ever higher cutting speeds.
The nozzles provide you with a higher cutting speed and reduced abrasive consumption.
Development in modern milling technology is directed towards higher and higher cutting speeds.
New or thick grass may require a higher cutting height and a narrower cutting path.
Cutting edges on carbide tools extend the lifetime and allow a higher cutting speed.
Low tool wear permits the use of higher cutting speeds resulting in increased productivity.
X New or thick grass may require a narrower cut or a higher cutting height.
All these features guarantee a higher cutting precision than any other machine in this category.
Further development of EXTRA with much higher cutting speed.
Set higher cutting height I Allow the lawn to dry.
The ZXB stands out for its low cutting force that enables higher cutting feed rates.
For a higher cutting height, use the lower hole on the deck.
For normal mowing, select a higher cutting height.
Higher cutting quality and efficiency, cutting speed is up to 40m/min with appearance and beautiful.
For thicker substrates or for substrates requiring higher cutting power,.
If the speed drops, select a higher cutting height setting and / or reduce the rate of feed.
Your advantages, economical cutting and low costs percut thanks to higher cutting performance.
Adjust to higher cutting height . - A lawn scarifier can remedy.
A smaller angle yields more fibrillation, and a greater angle yields a higher cutting effect.
If motor speed begins to slow, select a higher cutting height or reduce the feed rate.
Nevertheless, the new criteria, besides considering only the impact factor, have established higher cutting points.
Up to 100 % higher cutting speed whilst maintaining the same tool life.
Convert mower to side discharge R3 and mow grass first with higher cutting setting.
Higher cutting quality and efficiency, cutting speed is up to 80m/min with appearance.
As can be seen above, blade 2 has a higher cutting force than blade 1.
Convert mower to rear discharge U2 + S1 and mow grass first with higher cutting setting.
Operate at max . rpm. - Adjust to higher cutting height.
Optimal conditions allow using up to 50 % higher cutting data.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
