Examples of 'hold tool' in a sentence
Meaning of "hold tool"
hold tool: Refers to the act of grasping or keeping a tool in one's hand or possession. This phrase is commonly used in the context of working with tools or equipment
How to use "hold tool" in a sentence
Basic
Advanced
hold tool
Always hold tool firmly to avoid kickbacks.
Use clamps or a vise to hold tool when practical.
Hold tool by insulated gripping surfaces when.
Pulse the tool and pull bit release Hold tool firmly while driving.
Firmly hold tool with both hands.
To reduce the risk of personal injury, always hold tool securely.
Hold tool securely with both hands.
Stand upright - hold tool in relaxed position.
Hold tool firmly with two hands.
To reduce the risk of personal injury, always brace or hold tool securely.
Hold tool at loose end of flexible wire.
To reduce the risk of electric shock, always hold tool by insulated gripping surfaces.
Hold tool firmly to control its twisting action.
Personal injury, ALWAYS hold tool firmly with both hands in the.
Hold tool vertical with rubber reservoir at top.
See also
IV - Additional safety rules for screwdrivers Hold tool by insulated gripping surfaces when per.
Hold tool firmly while driving.
Subsequently, a first actuator 24 is then actuated to hold tool 2 in a perfectly horizontal position.
Hold tool with both hands to maximize control.
Always hold tool by plastic enclosure.
Hold tool by insulated gripping surfaces when performing an operation.
When grinding, hold tool at a 5o to 15o angle, using constant pressure for a uniform fi nish.
Hold tool securely until the cylinder retracts fully.
When grinding, hold tool at a 5o to 15o angle, using constant pressure for a uniform finish.
Hold tool with both hands keeping pressure on front handle.
Hold tool upright so nails will slide backwards toward magazine slot.
Hold tool by insulated gripping surfaces when performing an operation where the cut.
Hold tool by insulated gripping surfaces when performing an operation where the cutting.
Hold tool securely until jaws open and the tool turns off.
Hold tool fi rmly with both hands to control the twisting action of the drill.
Hold tool firmly with both hands in the proper position for operation as shown.
Hold tool by insulated gripping surfaces when performing hidden wiring or its own cord.
Always hold tool firmly with both hands and only operate when hand held.
Hold tool firmly with two hands see figure A.
Hold tool with two hands as shown in Figure F.
Hold tool away from you & squeeze trigger.
Hold tool securely until the cylinder retracts fully . nOTE.
Hold tool with two hands as shown in Figure 5.
Hold tool with both hands!
Hold tool at 5 to 15 angle to ensure proper sanding pressure and control.
Hold tool at 5 to 15 angle as shown to ensure proper sanding pressure and control.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
Examples of using Hold
Show more
Frank might not hold kindly to that
Hold the equipment fi rmly by the handle
The way you hold your head
