Examples of 'holding time' in a sentence
Meaning of "holding time"
holding time: This phrase suggests waiting or delaying action for a period, holding onto moments or events without immediate progress or change
How to use "holding time" in a sentence
Basic
Advanced
holding time
This holding time may be determined experimentally.
Other temperature and holding time modes.
Holding time and number of books.
Percent life holding time may be calculated.
Holding time is preferably to allow the crystals to grow.
Are discarded when the holding time expires.
Reference holding time days or hours and initial.
Registration and identification and minimum holding time.
Reference holding time in days or hours.
Determination of the holding time.
Select the holding time in seconds.
The product was equally crispy as before the holding time.
The holding time in minutes is measured.
The main difference is the holding time of a position.
The holding time is reported in minutes.
See also
Calculation of the holding time.
The pressure holding time should be extended appropriately.
The time for this cycle is the holding time.
A holding time of thirty minutes is preferred.
Reference holding time.
Actual holding time for gas being carried days or hours.
Marking of holding time.
The holding time particularly is a challenge for many operators.
Actual holding time.
Holding time line.
Token holding time.
Holding time in the agitated reactor is approximately one to three hours.
Maximum holding time.
Bonded samples were made to measure the static peel holding time.
The average holding time is usually just a few hours.
The maximum injection pressure and the holding time were recorded.
No holding time is required.
It is furthermore preferable for a holding time to follow the vibration time.
A holding time of less than recommended time will result in loss of hardness.
Total holding time.
A holding time for the dehumidification is set in dependence of the relative humidity.
O steam holding time.
The holding time is to be long enough to complete the desired microstructural transformation.
This time lapse is the holding time for the boiler.
The grain size was found to increase with the holding time.
It is furthermore preferable for a holding time to follow the crease time.
The pulp was not mixed during the three hours of holding time.
Other initial values for holding time can also be used.
The heating and cooling times are not included in the holding time.
Denaturation and annealing are so rapid that no holding time at a particular temperature is necessary.
Holding time time at hardening temperature after the tool is fully heated through.
The extent of rounding is controlled by the holding time selected for the process.
Increasing the holding time makes possible wider use of stud farms.
Automatic timers and valves ensure the proper holding time has been met.
The holding time in this temperature range was changed between the two sheets.
