Examples of 'holding tube' in a sentence
Meaning of "holding tube"
Holding tube: A cylindrical container designed to hold and protect certain items or substances
How to use "holding tube" in a sentence
Basic
Advanced
holding tube
Steam is used to heat up a holding tube containing cartridges of biomass.
The holding tube is slightly tilted to promote the drainage of the pump.
The pressure tube is connected to the holding tube by retaining tabs.
The holding tube is adjustable for variations in production or for different stay times.
The gelled product leaving the holding tube is cut into pieces.
The heated emulsion leaving the emulsion mill is then transferred to a holding tube.
The locking element holding tube therefore also serves as a rod pusher.
The heated emulsion leaving the emulsion mill can be transferred to a holding tube.
The holding tube is indicated in Fig.
The hot emulsion is ejected from the emulsion mill into a holding tube.
The holding tube includes a first, fixed section.
The reaction time can alternatively be controlled by a release valve on the holding tube.
The holding tube is placed immediately after the injector 1.
The heated mixture is ejected from the emulsion mill in a thin stream into a holding tube.
The holding tube also includes a second, adjustable section.
See also
Armoring is placed around the holding tube 4.
The holding tube is further provided with a level indicator 11 of conventional type.
The residence time in the holding tube was about 5 minutes.
G of the silica-supported final catalyst described above was weighed into a catalyst holding tube.
The residence time in the holding tube is less than 6 minutes.
The laid tubes are then placed between the central reinforcing wire 1 and a holding tube 4.
Alternatively, the holding tube may consist of a combination of helical and straight conduit.
Insert the armrest for the healthy arm into the holding tube and tighten locking screw 14.
In the holding tube, the heated emulsion coagulates while moving slowly along the holding tube.
The gelled product leaving the holding tube is cut into pieces of about 10 mm size.
The holding tube can have multiple shut-off and / or diverter valves along the length thereof.
During this time interval, the product stays in a so-called holding tube.
In the embodiment described, the locking element holding tube ( 8 ) therefore also serves as a rod pusher.
The first, straight conduit 5 constitutes a part of the first, fixed section of the holding tube.
Swedish Patent Specification SE 513 537 describes a holding tube which is integrated in the pressure vessel.
The remaining space 7, between the conical bottom 2 and the conically shaped body 6, constitutes a holding tube.
The heated mixture was discharged from the emulsion mill at a temperature of 110°C into a holding tube.
It was then held at this temperature for 30 - 40 seconds in an insulated holding tube.
From the outlet of the steam injector 3 there is a conduit 10 to a holding tube 11.
The stream can be cooled using optional heat exchanger 28b, before passing into holding tube 30.
Actuator rod 232 is slidably disposed within a longitudinal bore formed through DLU holding tube 214.
