Examples of 'hole drilling' in a sentence
Meaning of "hole drilling"
hole drilling ~ A process of creating holes or cavities in a material using specialized equipment such as drills. This term is commonly used in construction, manufacturing, and mining industries
How to use "hole drilling" in a sentence
Basic
Advanced
hole drilling
The method does not require hole drilling.
New deep hole drilling concept.
There are three basic types of deep hole drilling.
Camshaft oil hole drilling machine.
The hole drilling competition involves having to grind holes into a rock.
Specialists in all types of deep hole drilling operations.
Ground hole drilling rig wireline drilling rig.
Limited to consolidated formations where open hole drilling is possible.
Deep hole drilling.
This allows a large volume of material to be obtained during starting hole drilling.
It is used to perform open hole drilling and milling operations.
Hole drilling is an accepted production practice and is routinely performed in composite manufacturing.
Edm small hole drilling.
Other problem is the linearity of guide channel in the tap hole drilling machine.
Inclined deep hole drilling unit with moving guide bushing.
See also
The centre pin can be knocked out to allow deep hole drilling operations.
Large hole drilling.
The opening is formed by drilling using a laser or any other appropriate hole drilling system.
Catheter hole drilling.
The hole drilling method is one of the most used methods for residual stress measurement.
Meusburger offers an attractive lead time from five days for deep hole drilling of sides.
Crown hole drilling.
With this, it is possible to effectively carry out the hole drilling operation.
The option of deep hole drilling enables the milling of very deep holes.
There are two types of rotary drilling, open hole drilling and core drilling.
Deep hole drilling Maximum workpiece dimensions.
It looks like Tornos has a deep hole drilling feature on the ST too.
Tube Hole Drilling Machine is used for the flaring and flanging of.
However, independently of the technique used, it is extremely difficult to reach deep hole drilling.
Deep hole drilling machines are mainly used in the industries as following,.
Furthermore, there is a strict time restriction to the tap hole drilling at a blast furnace.
Anchor hole drilling Rotation + Hammering.
Thus, the time restriction to the tap hole drilling will be more strict.
The special oversize tolerances p6 and j6 can replace your special diameters for pilot hole drilling.
The compared methods were x-ray diffraction, hole drilling and the contour method.
Deep hole drilling with maximum precision and cost-efficiency ( pdf ).
Drag bit has a higher durability . It is always the first choice of hole drilling.
Not to be confused with the core hole drilling made for drilling through concrete structures!
This type of seismic drilling is often referred to as " Shot Hole Drilling.
Titan Grade 5 - deep hole drilling on automatic lathe.
Fig . 15 is a side view of a conventional, compressed air driven tap hole drilling machine.
FIG . 24 is a perspective view of a pilot hole drilling device of one exemplary bone joining device.
Long hole drilling machine Schelling Type BM2 + various drill bits.
The wall must be smooth and perfectly clean after hole drilling ( 30 mm ) before installation.
HAUSHERR blast hole drilling machines, components, Compressors, rotary heads, dust collectors, sampling systems, accessoires.
Up to 35 % shorter production times for deep hole drilling.
Anchor hole drilling ( Rotation + Hammering ) Adaptor for SDS-plus shank bit.
It has large payload capacity . It meets the lifting requirement for the 1500m, vertical hole drilling.
You'll also be interested in:
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
Examples of using Drilling
Show more
When drilling in roofs and the like
Quality of water after drilling the infrastructure
Drilling activity and gas well productivity
