Examples of 'hole is drilled' in a sentence
Meaning of "hole is drilled"
hole is drilled: This phrase describes the process of creating an opening or cavity in a solid material using a drill or similar tool. It is often used in construction, engineering, and manufacturing contexts
How to use "hole is drilled" in a sentence
Basic
Advanced
hole is drilled
Also a vent hole is drilled in the pump housing.
The etching is stopped when the hole is drilled.
The pilot hole is drilled and then expanded.
The wearbushing stays in place until the next casing hole is drilled.
Then the hole is drilled completely.
The drill is introduced into the sleeve and a hole is drilled to the desired depth.
A hole is drilled in the sheet of particleboard.
A surgical procedure in which a hole is drilled into the skull.
New hole is drilled somewhere else.
Following the forging stage a hole is drilled in the tang of the blade.
Each hole is drilled to the bottom of the coal bed.
So a burr hole is drilled.
A hole is drilled through each pane to define a fixing position.
Wooden plate adapted, and the hole is drilled to monitor.
Once the hole is drilled a black artery will appear.
See also
The technique is simple and accessible, a hole is drilled in the stump.
A hole is drilled in each of.
Below the scleral flap, a hole is drilled to the anterior chamber.
A hole is drilled into the coated tablets on the mixed amphetamine layer side.
Based on said x-ray the pilot hole is drilled in the jaw bone.
At least one hole is drilled proximally and distally of the osteotomy.
To produce the delicate component, a hole is drilled into the steel rod.
A hole is drilled through the top of your tooth to access the infected pulp.
In the outer circumferential section, a hole is drilled and filled with a colored liquid.
Often, a hole is drilled through the bead to allow easier fitting.
In the normal procedure for installing a fixture a hole is drilled in the jaw-bone.
Make sure the hole is drilled all the way through the elbow and pipe.
In the above cases, the mid-section of a hole is drilled first.
A rockbolt-setting hole is drilled through a sprayed concrete layer in a bedrock or ground.
After this, a through central hole is drilled with a diameter of 10 mm.
A hole is drilled into bone 14 by conventional means using either a hand or power drill.
First, a hole is drilled vertically.
A hole is drilled about 5 mm from the fold, through the center line of both faces.
In one example, a hole is drilled in to the bone at a diameter of about 9mm.
Firstly, a hole is drilled in the bone tissue to which the fixture shall be fastened.
A 1.3 cm circular hole is drilled in the center of the plate.
The hole is drilled by pressing the hand-drill until a satisfactory pit hole is created.
Case 1 The hole is drilled before the liquid rises.
Once the hole is drilled in the medial cortex, the anchorage screw can be inserted.
A cylindrical hole is drilled for cylindrical implants, and for conical implants a conical hole is prepared.
A small hole is drilled through the skull and a temperature-controlled electrode is inserted into the thalamus.
A 6 mm hole is drilled in the center.
You'll also be interested in:
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
Examples of using Drilled
Show more
Wells have been drilled and are undergoing testing
Drilled holes and slotted holes are labeled
No holes need to be drilled through the housing
