Examples of 'holes are drilled' in a sentence
Meaning of "holes are drilled"
holes are drilled - This phrase is used to describe the action of creating holes by using a drill or similar tool, often in materials like wood, metal, or plastic
How to use "holes are drilled" in a sentence
Basic
Advanced
holes are drilled
The holes are drilled by dry or liquid etching.
Mucking is continuous while holes are drilled and blasted.
Holes are drilled as shown in the drawing.
In areas between bars holes are drilled.
On marks four holes are drilled in the sheet of plywood.
The frame is then removed and string holes are drilled.
The dewatering holes are drilled during the transfer.
It is ideal on heavy work, where many holes are drilled.
Countersunk holes are drilled for the spoke nipples.
In case of gas outburst prone areas cross measure holes are drilled from advance headings.
Holes are drilled and threaded on each end.
Fender strut mounting holes are drilled for easy mounting.
The holes are drilled half the depth of the stone.
One or more vertical holes are drilled into the ground.
Holes are drilled in the floor or the stairs of the building.
See also
The sequence in which the holes are drilled is not important here.
Holes are drilled in the ground to get the oil out.
First, surfaces of the through holes are drilled and deburred.
The holes are drilled before subjecting the material to tempering.
There are generally no multiple cracks, except where multiple pin holes are drilled.
Holes are drilled as desired.
Using drill guides for angular precision, holes are drilled to the appropriate depth.
Small holes are drilled on the back of the upper watch crown.
Upon fitting the implants, the said holes are drilled in the bone with great precision.
Holes are drilled or punched through the two pieces of metal to be joined.
Also preferably, the secondary holes are drilled after the primary holes have been drilled.
Holes are drilled into the top to let the heat escape.
The holes for plated-through holes are drilled later after the temporary support is removed.
Holes are drilled on the side of the floor or the stairs of the building.
Thereafter, the now formed frame is removed from the mold and string holes are drilled.
All holes are drilled.
Also, they can't be easily adjusted after the initial holes are drilled.
This assures that the holes are drilled precisely in the desired locations.
Well holes are drilled into the earth until a reservoir of fluid is reached.
Matching clearance holes are drilled in the deck 12.
Two holes are drilled axially in the cladding on opposite sides of the core.
In the stump intended for destruction, holes are drilled into which mushroom " threads " are laid.
Holes are drilled through the floor and outlets are installed on top of the floor.
On longwall faces the 6 m long holes are drilled at 10 m intervals.
The bore holes are drilled so that the pins are inserted under stress.
In one embodiment the holes are drilled using a mechanical drill having a microcarbon drill bit.
Holes are drilled through the fiberglass layer and copper patch and the fasteners are reinstalled.
What if the holes are drilled in the wrong place?
Holes are drilled through the sheet, to access the fittings.
On these, smaller holes are drilled at intervals to house the individual plants.
Holes are drilled in the centre of the occlusion surfaces, according to the known technique.
Advantageously, multiple holes are drilled in clusters to make a uniform pattern easier to achieve.
The holes are drilled with random depth in a random angular arrangement, thereby providing a unique identification.
With a deep-hole drill, holes are drilled at an angle in the longitudinal direction see drawing.
The holes are drilled with internally cooled single-lip drills, guaranteeing a high drilling quality and precision.
You'll also be interested in:
Examples of using Holes
Show more
Great holes have been cut in the earth
Always remove the lid or put holes in it
They cut holes behind every cabinet
Examples of using Drilled
Show more
Wells have been drilled and are undergoing testing
Drilled holes and slotted holes are labeled
No holes need to be drilled through the housing
