Examples of 'hood body' in a sentence
Meaning of "hood body"
The phrase 'hood body' does not have a commonly recognized definition in English. It may be a typographical error or a colloquial expression used in a specific dialect or slang. Without further context or clarification, it is challenging to provide a specific definition or use case for this phrase
How to use "hood body" in a sentence
Basic
Advanced
hood body
Position dual blower inside hood body.
Before fixing the hood body to the frame.
Remove blower from interior of hood body.
Attach blower to hood body from the back of.
Position internal blower inside hood body so.
Connect the hood body outlet to the top part of the.
Position dual blower inside hood body as shown.
Place canopy over hood body and secure it to hood body using.
Insert the flange on the hood body outlet.
Out from the hood body during the closing of the hood.
Remove single blower plate from hood body.
Sharp edges may be located on the hood body as a result of the manufacturing process.
Remove the grease filters from the hood body.
Wipe the range hood body off with a cloth immersed in a mild detergent.
Position capacitor box inside hood body and.
See also
The Hood body should be secured to wall studs.
Put the glass on the hood body and then.
Make sure the bracket fully engages the holes on the hood body.
Screws Vr located on the hood body mounting points.
Angle the duct cover to slide the tabs under the ledge of the hood body.
The correct hood body position can be levelled with Vr screws.
Remove the protective coating from the hood body and outer chimney.
Hang the hood body C on the hanger.
Connect the house ducting to the damper on the hood body if ducted install.
Hood body on the left using the pin, so that it does not close again.
Position the curved plate glass over the range hood body as shown.
Before hooking the hood body it is necessary to tighten 2 Vr screws.
Adjust the screws Vr to level the hood body.
Cooker hood body A equipped with a light, a fan unit and a decorative lower masking frame C.
Insert the fl ange 9 on the hood body outlet.
Cooker hood body A equipped with a light, a fan unit and a decorative lower masking frame D.
Attach top cover plate to top of hood body using 8.
Hang the hood body C on the fixed cooker hood wall hanger D, level the hood using.
Insert the reducer flange 9 on the hood body outlet.
Hang the hood body C and lower chimney B both ele- ments should constitute an integral part.
Assemble the half-shells of the hood body extension piece.
Disconnect blower plug . attaching single blower plate to top of hood body.
Assemble the two halves of the hood body extension piece 14.
The hood body is made of noble, easy-toclean materials such as stainless steel.
Push fit the assembled hood body extension piece 14 onto the.
Insert the lower flue fixing bush 17 in the top of the hood body.
Remove ( 4 ) screws from inside hood body attaching single blower plate.
Push fit the air outlet fitting 15 onto the air outlet of the hood body.
Remove ( 4 ) screws at top of hood body attaching blower to single blower plate.
Flue assembly - Mounting the hood body.
Push fit the assembled hood body extension 14 onto the air.
Hood body with sliding glass ( 1 ) filler panel.
Remove ( 4 ) screws from interior of hood body attaching blower plate to hood body.
The hood body 15 and flash ring 49 are constructed of a rigid plastic.
A first filter device 12 is disposed at an opening of the hood body 10 towards a fume source.
You'll also be interested in:
Examples of using Hood
Show more
This range hood must be properly grounded
The same space has a cooker hood
The hood of your car is still warm
Examples of using Body
Show more
The disposition of the body suggests contrition
The body has not been autopsied or embalmed
Number of proposals of a body to commence criminal proceedings
