Examples of 'horizontal tail' in a sentence
Meaning of "horizontal tail"
horizontal tail: In aerospace terminologies, a horizontal tail refers to the horizontal stabilizing surface at the tail of an aircraft. It plays a crucial role in maintaining the aircraft's stability and control during flight by providing lift in the horizontal direction
How to use "horizontal tail" in a sentence
Basic
Advanced
horizontal tail
The horizontal tail units were increased in span.
A hinged elevator is attached to the horizontal tail.
The horizontal tail was raised nine inches.
There was no horizontal tail.
Horizontal tail is out of control.
Losing that store disrupted airflow over the horizontal tail.
Fix the horizontal tail wing as shown bellow.
The elevators were large and projected well beyond the fixed horizontal tail.
Horizontal tail gust load.
Thermal and structural analysis of the vertical and horizontal tail plane stabilizers.
Fully slide the horizontal tail into the fuselage slot.
Install clear tape on the top and bottom of the horizontal tail and the fuselage.
Slide the horizontal tail stab through the allotted space in.
It was bipedal, the horizontal torso being balanced by a long horizontal tail.
It had a cantilever horizontal tail surface with three vertical surfaces.
See also
The lower parts of the fuselage, wings and horizontal tail are blue.
The wings and horizontal tail surfaces can be folded for trailering or storage.
The MiG-AT has received single-fin and tailplane sredneraspolozhennoe horizontal tail.
The horizontal tail is a stabilator with an antiservo tab sometimes termed an antibalance tab.
Its empennage is cruciform, with the horizontal tail part-way up a triangular fin and rudder.
Horizontal tail plane according to any of the preceding claims obtained from a composite material.
Note, Alignment marks are on the top and bottom of the horizontal tail.
The horizontal tail structure of the empennage consists of the horizontal stabilizer and the elevator.
Unlike the earlier Mirage III the F2 had a high-mounted swept wing and horizontal tail surfaces.
The parallel chord horizontal tail had separate elevators with the deep rudder moving between them.
Introduced a shorter fuselage, a new, higher aspect ratio wing, smaller horizontal tail and two-crew operation.
Secure each horizontal tail piece in place with a drop of CA.
Figure 2 is a Mach number vs. Span diagram for the horizontal tail plane of Figure 1.
Install the horizontal tail on the fuselage using the two screws A.
Install the 2 piece ( left and right ) horizontal tail as shown.
Horizontal tail plane for an aircraft comprising,.
Figure 3 . - shows a perspective view of an horizontal tail plane according to the invention.
The horizontal tail was straight-tapered but the elevators had prominent horn balances.
Nowadays, sometimes all-moving horizontal tail is used for cross-control aircraft.
The horizontal tail surfaces were more tapered, the elevators balanced and carrying trim tabs.
These surfaces were actually the horizontal tail surfaces from the F-16A.
Slide the horizontal tail halves ( B ) into place with the control horn facing down.
The vertical tail was swept back at 60 °, and the horizontal tail was V-shaped and dihedralled.
Vertical and horizontal tail surfaces are trapezoidal, with a swept fin.
Horizontal tail plane for an aircraft, the horizontal tail plane comprising,.
Method for manufacturing a horizontal tail plane characterized in that it comprises the following steps,.
Secure the horizontal tail piece in place using the included 2 screws C.
Secure the two horizontal tail pieces in place using the 2 included screws B.
In addition, the horizontal tail plane 5 is swept forward at an angle φe.
Install the horizontal tail ( A ) on the fuselage under the linkages as shown.
Slide the horizontal tail ( A ) into the slot in the rear of the fuselage.
Slide the horizontal tail tube ( A ) into the hole in the rear of the fuselage.
Insert the horizontal tail joiner tube ( A ) into the fuselage.
Slide the horizontal tail ( A ) and joiner ( B ) into the slot in the rear of the fuselage.
You'll also be interested in:
Examples of using Tail
Show more
Get your stinking tail out of my face
The tail is retained unless otherwise specified
I will be on your tail until you kill me
Examples of using Horizontal
Show more
Store the machine in horizontal position to avoid
B horizontal flat jet for vertical surfaces
Place the banknotes horizontal on the hopper
