Examples of 'hose adapter' in a sentence
Meaning of "hose adapter"
A device or fitting used to connect two different sizes or types of hoses together. It allows for compatibility and easy connection between hoses that may have different diameters or fittings, enabling the flow of fluids or gases
How to use "hose adapter" in a sentence
Basic
Advanced
hose adapter
Connect other end to hose adapter at heater.
Press the hose adapter unit into the recess as far as the stop.
Screw off the stepped hose adapter.
Fit the hose adapter unit correctly.
Route the cable through the guide hose adapter.
Tighten the hose adapter securely with a spanner.
Recommendation for the use of the stepped hose adapter and hose connector.
Insert the hose adapter into the hose nut.
Attach pipe or fitting to the discharge or use the supplied garden hose adapter.
Attach the exhaust hose adapter tothe unit.
Push the union nut onto the black spiral stepped hose adapter.
Insert the suction hose adapter into the.
Insert the hose adapter into the slot on the back of the air conditioner.
Do not try to fasten the hose adapter during operation.
Insert one new small flat washer into the end of the hose adapter.
See also
Screw the stepped hose adapter to the outlet.
Hold hose adapter end so that A button is at the top A.
Check connection between the hose adapter and the hose.
Screw on the hose adapter by hand until it is seated on the.
Slip the end of any standard vacuum cleaner tube onto hose adapter shown in Figure.
Remove hose from hose adapter on the back of cleaner.
In case of twin duct type, fix the two duct hose adapter nozzles.
Insert drain hose adapter into bent end of drain hose.
On one outside end of the Rubber Drain Hose Adapter is a raised rib.
Attach garden hose adapter with the pump end of garden hose.
If required, insert the dust extraction hose adapter into the dust.
Remove the garden hose adapter from the water solenoid valve.
Ment with the aid of the quick connection for the garden hose adapter 9.
Connect the garden hose adapter to the water solenoid valve.
Attach the tapered nozzles, needle or high flow inflator / deflator adapter body to the hose adapter.
Push the flexible hose adapter into the air intake.
The filter intake is marked with IN on the hose adapter unit 2.
Remove the hose adapter unit and clean it under warm water.
Your sander is equipped with a removable vacuum hose adapter tube for dust and chip extraction.
Insert the suction hose adapter powerfully into the intake opening of the vacuum cleaner Fig.
Removal of the exhaust hose 1 Remove the exhaust hose adapter fromthe unit.
Align the stepped hose adapter prior to tightening the union nut.
NOTE, Check whether the filter screen is missing before retightening the hose adapter.
Press the suction set hose adapter onto the suction set.
Connect a vacuum cleaner hose ( not supplied ) to the hose adapter.
Put the steam hose adapter into the steam hose connection nozzle.
Ball-valve and hose adapter.
Screw the stepped hose adapter including union nut and sealing ring to the outlet.
Place the two valves ( 1 ) onto the connections of the hose adapter unit.
Shorten the stepped hose adapter to the diameter of the hose used if necessary.
One end of the charging hose assembly 60 is removably attached to charging hose adapter fitting 50.
Screw the stepped hose adapter including sealing ring onto the inlet.
For hose connection, the included L-shaped hose adapter must be used.
Pull out the exaust duct hose adapter nozzles from the grooves on the connector.
Insert the end of a standard vacuum cleaner tube ( II ) into the hose adapter.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Adapter
Show more
Connect the adapter into a main socket
Adapter for recharging on vehicle cigarette lighter
Charging cable adapter with alligator clamps
