Examples of 'hose handle' in a sentence
Meaning of "hose handle"
hose handle: This phrase typically refers to the gripping or controlling part of a hose, which is a flexible tube used for conveying water or other substances from one point to another
How to use "hose handle" in a sentence
Basic
Advanced
hose handle
Attach extension wand to the hose handle.
Pull the hose handle from side of cleaner.
Connecting the brush into the hose handle.
Use the hose handle to vacuum the nozzle.
Attach the extension tube to the hose handle.
Point the hose handle in the desired direction.
Push telescopic pipe firmly into hose handle.
Remove the hose handle from the telescopic tube.
Then attach it to the end of the hose handle.
The hose handle can be separated in the middle bayonett connection.
Slide the tubes onto the hose handle.
Insert the hose handle into the side of the cleaner.
Push the accessory on to the end of the hose handle.
Press the control button of the hose handle to operate vacuum cleaner.
The easiest way to clean it is by using the hose handle.
See also
The current carrying hose handle contains electrical connections is not a serviceable.
Vacuum brushes with end of hose handle after use.
The clip on the hose handle holds the nozzle when it is not in use.
Attach the power nozzle directly to the hose handle.
Attach the combination nozzle on the hose handle so it is always within easy reach.
Connecting power nozzle wand and electrified hose handle.
Attach the telescopic wand to the hose handle so that the catch clicks shut.
Push the accessory onto the end of the hose handle.
Connect hose handle to the end of the extention wand and twist slightly to tighten.
Take out the tools from the hose handle.
Attach the power nozzle to the hose handle and connect it to the power outlet.
The suction power may be controlled manually on the hose handle.
All accessories can be fitted to the hose handle or the end of the tubes.
Connect the power nozzle cord to the connector on the hose handle.
Attach the telescopic wand to the hose handle so that the catches clicks shut.
Clean the floor nozzle after use by using the hose handle.
The switch in the electrifi ed hose handle will operate the Power Nozzle only.
Simply restart the power unit by pressing the hose handle switch.
Nilfisk hose handle Extreme.
This confi rms communication between the hose handle and power unit.
Pull hose from hose handle for additional length Diagram 3b.
Simply restart the vacuum system with the switch on the hose handle.
Suction can also be regulated on the hose handle by opening / closing the vent.
Slide the lock switch on the telescopic tube towards the hose handle.
The four LEDs on the DataSync hose handle will flash, indicating an automatic shutoff.
The accessories may be attached to the accessory holder in the suction hose handle.
Attach the telescopic tube to the hose handle and floor nozzle.
Simply push the attachment firmly onto the end of the wand or hose handle.
Slide the hose handle into the telescopic tube see figure 3A.
Press the appropriate button or on the suction hose handle to adjust suction power.
Your vacuum cleaner is fitted with mechanical suction regulator located on the hose handle.
Plug power cord into outlet, turn cleaner and hose handle ( I ) ON, and resume cleaning.
ZELMER vacuum cleaners are also equipped with mechanical suction adjustment on hose handle.
Hose handle with brushroll ON / OFF controls 3.
Attach the end of the suction tube to the hose handle of the vacuum hose.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Handle
Show more
You can barely handle one woman
Handle circuit boards only by the edges
To reattach the handle on the opposite side
