Examples of 'hot deformation' in a sentence
Meaning of "hot deformation"
Hot deformation is a process in metallurgy where a material is deformed plastically at an elevated temperature to change its shape and properties
How to use "hot deformation" in a sentence
Basic
Advanced
hot deformation
Hot deformation high deformation studies rates.
Aluminum dynamically recovers during hot deformation producing a network of subgrains.
The hot deformation temperature is an important parameter of the method.
It is preferably applied following the hot deformation phase for wrought alloys.
Said hot deformation may be forging.
The presence of particles induces the apparition of damage during hot deformation.
Said hot deformation may be rolling.
Type II precipitates are considered to form in austenite during hot deformation.
The prior hot deformation does in fact modify the hardenability of the steel.
Where QHW is the activation energy for hot deformation and T is the absolute temperature.
The hot deformation ratio should preferably be sufficient to obtain a monolithic structural element.
Preferably, the filling of hollows 6 is achieved by galvanic deposition or hot deformation.
Gauges Surface Finish Hot deformation process Cold deformation processes i cut Machining by chip removal.
Preferably, the hollow filling step h is performed by galvanic deposition or hot deformation.
Hot deformation generates the following advantages,.
See also
On the basis of laboratory tests, including hot deformation tests, two solutions were adopted.
Response to hot deformation of a vanadium steel a . kinetics of mechancial softening b . kinetics of static recrystallisation.
Preferably used for oil industry products produced by hot deformation method, without welds.
Reheating before hot deformation *, symbol indicating the conditions in each pass.
Hot deformation and mechanical properties of ti-6AL-4V/TiC metal matrix composites.
It reaches a maximum moreover with hot deformation causing maximum work hardening of the austenite 2.
Firstly, the hot deformation behavior of the AA5383 alloy is experimentally characterized.
The work covered both cold and hot deformation methods ; two steels were used,.
Microstructures after hot deformation are evaluated using SEM-EBSD and TEM.
You'll also be interested in:
Examples of using Deformation
Show more
No damage or deformation of the seat frames was observed
Gentle braking can avoid this deformation
Device for measuring deformation of a gravity dam
Examples of using Hot
Show more
Open both hot and cold faucets
Hot water can overflow causing burns
Do not place hot liquids in this cupholder
