Examples of 'hot end' in a sentence
Meaning of "hot end"
hot end: This term is often used in reference to the heated extremity or section of an object, device, or system. It can indicate the part that generates high temperatures, serves as a focal point of activity, or requires caution due to its intense heat
Show more definitions
- The part of a 3D printer that heats the filament
How to use "hot end" in a sentence
Basic
Advanced
hot end
Put similar hide at the hot end.
The hot end in your mouth.
Do not measure the temperature difference at the hot end.
We had it real hot end of summer and into fall.
Hot end dust.
Each bed has a hot end and a cold end.
The hot end consists of a heating chamber and a nozzle.
Effect of conduction of heat from the hot end of the thermocouple.
Hold the hot end of a lit cigarette close to a tick.
Liquid wastes are typically injected into the hot end of the kiln.
Innovation in the hot end sector through intelligent insulating systems.
This blockage is usually caused by dirt or carbonized material in the hot end.
These holes and the hot end of pulse tube are at the same circumference.
This is the part that feeds the filament to the hot end.
Heat exchanger whose hot end has a device for protecting the tube plate.
See also
The result is different potentials at the hot end than at the cold end.
The blob can very easily damage some of the delicate parts of the hot end.
When the temperature at the hot end begins to decrease the discharging process is stopped.
The liquid is returned through the wick to the hot end by capillary action.
A maximum allowable hot end stoneware bed temperature will control the amount of dilution air introduced.
Such an orifice and a reservoir system are connected to a hot end of a pulse tube thereof.
For this reason, an all metal hot end is necessary when printing using a nylon filament.
A stack is disposed in the interior chamber and has a hot end and a cold end.
Figure 1 illustrates the hot end 10 of a continuous float glass operation.
The picture here shows the second hole to use to secure the hot end support.
Don't forget that the hot end needs to be heatsinked!
It also makes it easier to change the Hot End.
A direct drive extruder sits directly above the hot end and forces filament straight through.
Extrusion in 3-D printing using material extrusion involves a cold end and a hot end.
Tairhot = air temperature of hot end of heat exchanger.
Hot end 72 is also the end which emits intake air which has been preheated.
The difference is that separates the drive system ( motor ) of Hot End using a PTFE tube.
The hot end exhaust can withstand pressure up to 30 PSIG ( depending on the cold fraction ).
The condensed fluid then returns to the hot end 13 by gravity and capillarity.
The drive gear is what ‘ grabs ' the filament and pushes it towards the hot end.
Said hot end center section ( 26 ) has a height less than said selected height ;.
Production - hot end.
The method according to claim 15 or 16 comprising the step of applying a hot end coating.
For the Z axis, when the Hot end is going up, it correspond to a « positive » move.
The inner ring 50 is constituted by a thickened portion of the hot end of the tube 16.
A 3DBenchy created on a Prusa i3 using a color-mixing hot end.
