Examples of 'hydrate formation' in a sentence
Meaning of "hydrate formation"
hydrate formation: This phrase refers to the process of water molecules bonding with another substance to form a hydrated compound. It is commonly used in chemistry or geology to describe the creation of minerals or compounds through the absorption of water molecules
How to use "hydrate formation" in a sentence
Basic
Advanced
hydrate formation
Understanding methane hydrate formation to revolutionize pipelines.
Expansion of natural gases without hydrate formation.
Method for inhibiting or retarding hydrate formation or agglomeration in a production effluent.
It is therefore desirable to control hydrate formation.
Hydrate formation was detected by a release of heat and an increase in gas consumption.
Thermodynamic conditions favouring hydrate formation are often found in pipelines.
Methane hydrate formation in sandy sediments was supposed to be an unstable and complex process.
There is no technique for monitoring the hydrate formation in industry.
Excessive hydrate formation may also completely block flowlines and service equipment.
These compounds also optionally have a hydrate formation inhibiting effect.
Gas hydrate formation is associated with mud volcano activity at the bottom of the sea.
Applying measures intended to control hydrate formation under said control device.
The aim of this test was to determine the latency time preceding hydrate formation.
A typical situation where gas hydrate formation can occur is in off shore operations.
Currently there is no established measurement technique for monitoring the hydrate formation in pipelines.
See also
Therefore, preventing hydrate formation appears to be the key to the problem.
The process is desirably carried out under anhydrous conditions to obviate hydrate formation.
Hydrate formation and dissociation processes are of major interest in environ - mental and energy fields.
This water must be removed to protect the system from corrosion and hydrate formation.
Mechanisms of hydrate formation and transport with and without AA-LDHI in bubble conditions were proposed.
High water pressures and low temperatures provide the best conditions for methane hydrate formation.
The hydrate formation is checked by TGA and powder X-ray diffraction.
Production stops during which the fluids cool down increase the hydrate formation risks still more.
On-Line Control Hydrate formation control operations are generally very costly.
Actually, several techniques can be combined to avoid or remediate hydrate formation.
Under these conditions, no hydrate formation was observed over a period of more than 24 hours.
The water-in-oil emulsion may be broken once conditions are no longer conducive to hydrate formation.
The reference describes a maximum rate of hydrate formation as occurring at about minus 23.3°C.
Under these conditions, the stirred blocked 1.5 hour after the start of hydrate formation.
Gas hydrates in pipelines = = = Thermodynamic conditions favouring hydrate formation are often found in pipelines.
Under these conditions the stirrer blocked 3.5 hours after the start of hydrate formation.
Firstly, the latency period ( lp ) preceding hydrate formation.
Such precooling will generally be in the neighborhood of 20°C to avoid methane hydrate formation.
Hysteresis was observed upon desorption at 65 and 55 % RH, indicating possible hydrate formation.
You'll also be interested in:
Examples of using Hydrate
Show more
Gas hydrate exploration will be community dependent
Nand you will hydrate some more
Chloral hydrate was routinely administered in gram quantities
Examples of using Formation
Show more
Reduce the formation of unsustainable informal settlements
They are getting into some sort of formation
Formation in prayer for couples and families
