Examples of 'hydraulic head' in a sentence
Meaning of "hydraulic head"
Hydraulic head is a term commonly used in engineering and geology to refer to the pressure exerted by a column or column of water in a hydraulic system. It is a measure of the energy or force per unit area exerted by the water, typically due to gravity. Hydraulic head is an important factor in various applications, such as groundwater flow and fluid dynamics
How to use "hydraulic head" in a sentence
Basic
Advanced
hydraulic head
Not enough oil in hydraulic head.
The hydraulic head will be.
Too much oil in hydraulic head.
Hydraulic head box.
The world highest hydraulic head.
Thus a very large hydraulic head is available over a very short distance.
Incorrect connection of the high pressure hose to the pump or to the hydraulic head.
Replacement of hydraulic head.
These applications may not need to dam or retain water to create hydraulic head.
A decrease in the hydraulic head can result in the rapid loss of the sample.
The difference in elevation between the reservoirs affords a maximum hydraulic head of and minimum of.
The distribution of hydraulic head through an aquifer determines where groundwater will flow.
In general, electric potential is equivalent to hydraulic head.
The hydraulic head can be used to determine a hydraulic gradient between two or more points.
Most current hydroelectric projects use a large hydraulic head to power turbines to generate electricity.
See also
Hydraulic head and groundwater velocity variations in flat lying fractured sedimentary rock, p.
It has the highest pipe pressure and largest hydraulic head among the pipelines in China.
Operating rules for maximizing power generation, for example, include maintaining hydraulic head.
Consequently, the initial position of the hydraulic head distribution was calibrated under steady-state conditions.
Where h0 is the constant initial hydraulic head.
Abstract, Drawing hydraulic head contour maps is one of the first requested results in hydrogeology.
In either case, the underlying result is a reduction in hydraulic head loss.
Hydraulic head is composed of pressure head ( ψ ) and elevation head z.
Tested to resist up to 50 metres hydraulic head.
Only 13 hydraulic head measurements are available in the Oxfordian formation and 11 in the Dogger formation.
The present-day distribution of hydraulic head was estimated via a 20-year simulation.
All filter units are downflow, operated with filtration rate of 4 m 3 /m2 dia and hydraulic head variable.
A restriction 58 for creating a large hydraulic head loss is mounted in the duct 56.
Figure 2.5 Hydraulic head h, pressure head ψ, and elevation head z for a field piezometer.
Monthly monitoring for water quality and hydraulic head began in May 1996.
You'll also be interested in:
Examples of using Hydraulic
Show more
Hydraulic braking systems with stored energy
Air sealed in hydraulic system while operating
Hydraulic fracturing to extract oil and gas
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
