Examples of 'idle speed' in a sentence
Meaning of "idle speed"
Idle speed refers to the rate at which an engine operates when the vehicle is not in motion. It is the minimum amount of RPM (revolutions per minute) required to keep the engine running smoothly. Adjusting the idle speed affects factors such as fuel consumption, engine performance, and emissions
How to use "idle speed" in a sentence
Basic
Advanced
idle speed
This warm idle speed shall be measured.
Minimum mapping speed warm idle speed.
Only the idle speed screw is adjustable.
Follow the instructions to increase idle speed.
Idle speed screw on carburetor requires adjustment.
Keep engine at idle speed during flushing.
Idle speed screw on carburetor needs adjustment.
For running the engine at idle speed.
Check idle speed and reset if necessary.
Regime rotation of the engine at idle speed.
If engine idle speed is erratic or acceleration is poor.
Start engine and set idle speed.
The idle speed and maximum speed of.
Let the engine run at idle speed.
Turn idle speed screw counterclockwise to decrease.
See also
There are two types of idle speed control devices.
The idle speed should be stable too.
The cutter must not move at idle speed.
The idle speed has gone down.
Engine speed at idle speed min.
Adjust idle speed to recommended setting.
This also applies at idle speed.
Except carburetor idle speed adjusting screws are tight.
Idle speed may be higher during warming up of engine.
Adjust the idle speed as follows.
Idle speed is measured using a tachometer.
Adjusting the idle speed mix adjustment screw.
Idle speed of the engine is adjustable.
The pump will not oil at idle speed.
Recheck the idle speed after each adjustment.
The clutch will not engage at idle speed.
Idle speed is set too low.
The rotors will start to turn at idle speed.
Idle speed can be adjusted as required.
The chain must not move at idle speed.
Engine idle speed too low.
Checking or adjusting the idle speed.
Check the idle speed setting after starting.
Lower the engine speed to the idle speed.
Used for idle speed compensation.
Engine will now keep on running at idle speed.
Idle speed has gone completely berserk.
By increasing the engine idle speed.
Low idle speed rpm.
Allow engine to return to idle speed.
Set the idle speed per the technical specifications.
The blade should now be spinning at idle speed.
Check and correct the idle speed setting regularly.
Less efficient than reciprocating engines at idle speed.
Turn idle speed screw clockwise to increase idle speed.
You'll also be interested in:
Examples of using Idle
Show more
This warm idle speed shall be measured
Better she works than stays idle
And an idle life can not be pure
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
