Examples of 'ignitor' in a sentence
Meaning of "ignitor"
ignitor (noun): A device used to ignite a flame or start a combustion process
Show more definitions
- Alternative spelling of igniter
How to use "ignitor" in a sentence
Basic
Advanced
ignitor
Install electronic ignitor through cabinet wall.
The ignitor is dirty or there is a power outage.
Check to be sure ignitor is dry and click.
Ignitor cable not connected to ignitor electrode.
Install new alkaline battery in electronic ignitor.
Route the ignitor wires back down through.
Push control knob in and press ignitor.
Carefully place ignitor in a safe location.
Each surface burner has a spark ignitor.
Locate red piezo ignitor button on top of heater.
Burner will not light using ignitor.
Press the ignitor button rapidly.
Detach ignition wire from ignitor as shown.
The ignitor is accessible through the combustion chamber.
Carefully remove replacement ignitor from packing.
See also
Attach ignitor ground wire to ignitor.
Reattach electrode wires to the electronic ignitor.
Carefully remove ignitor from nozzle adapter bracket.
To ignite burners using the electric ignitor.
If ignitor continues to not work then use match.
Use care when cleaning the ignitor.
If there is a spark the ignitor terminal is fi ne.
Each sealed burner has a spark ignitor.
The spark ignitor is dirty or dusty.
To ignite burner using the piezo ignitor.
Check the ignitor regularly to make sure it is clean.
Press and hold electronic ignitor button.
An ignitor charge is activated by pulling on the emergency mask.
The burners have a solid state ignitor.
The ignitor is ready for delivery.
Push and release piezo ignitor button.
Connect ignitor wire and replace front panel.
Open casing door to access piezo ignitor.
Sparking between ignitor and electrode.
The burner may be equipped with an ignitor.
Check the cables to the ignitor are connected correctly.
The ignitor assembly may include a piezoelectric unit.
Press and hold in the electronic ignitor button.
The lead of the ignitor is positioned in the heater.
The spark module sends voltage to the ignitor.
A preferred ignitor assembly is a piezoelectric mechanism.
Do not bend or strike ignitor element.
The hot surface ignitor may not be positioned correctly.
Pull electrode wire from the electronic ignitor.
The hot surface ignitor may not be properly positioned.
Tighten or reattach loose ignitor wire.
The ignitor ignites the fuel and air mixture.
Push in the burner ignitor button.
Ignition is ensured by an electrical or pyrotechnic ignitor.
Connect black ignitor wire to left post on electronic ignitor.
