Examples of 'immersed in an oil bath' in a sentence
Meaning of "immersed in an oil bath"
immersed in an oil bath: This phrase refers to the act of submerging or soaking something, usually a mechanical component, in oil for lubrication or maintenance purposes
How to use "immersed in an oil bath" in a sentence
Basic
Advanced
immersed in an oil bath
The reaction flask was immersed in an oil bath.
The flask was immersed in an oil bath and polymerisation was conducted at 70°C for 8 hours.
In these cases the belt is partially immersed in an oil bath during operation.
The flask was immersed in an oil bath to raise the mixed solution temperature to 185°C.
In these cases during operation the belt is partly immersed in an oil bath.
The autoclave was immersed in an oil bath to control reaction temperature.
The reaction vessel was stirred vigorously and immersed in an oil bath at 65°C.
Some glass tubes were immersed in an oil bath to better control the temperature.
The flask was attached to a vacuum line ( 1-2 torr ) and immersed in an oil bath.
The slipping surface is immersed in an oil bath within the housing.
The apparatus was flushed thoroughly with nitrogen, and then immersed in an oil bath of 140 °C.
The flask was then immersed in an oil bath maintained at a temperature of 50°C.
Then, while argon sparging continued, the flask was immersed in an oil bath heated at 120°C.
The flask is immersed in an oil bath and stirred at 80 °C.
The vial was sealed with a Teflon-lined cap and immersed in an oil bath at 85°C.
See also
The solution was immersed in an oil bath and allowed to stir at 50 °C for 24 h.
The tube was sealed and immediately immersed in an oil bath preheated to 80 °C.
The flask was immersed in an oil bath set to 150°C, and stirring was started.
The tube was crimp sealed and immersed in an oil bath at 60 °C.
The reactor was immersed in an oil bath at 125°C and the reaction was continued for 5 h.
The flask containing monomer solution was immersed in an oil bath pre-heated to 80°C.
The reaction was then immersed in an oil bath which had been preheated to ca . 90°C.
The flask was purged with nitrogen and immersed in an oil bath maintained at 70°C.
The flask was immersed in an oil bath heated to 60 ° C.
The reaction vessel is then immersed in an oil bath at 60°C.
The Schlenk tube is immersed in an oil bath thermostatically maintained at 100 ° C. for 1 hour.
After returning to ambient, it is immersed in an oil bath preheated to 80 ° C.
The orange mixture was then immersed in an oil bath that had been preheated to 50 °C.
The apparatus was reassembled and immersed in an oil bath pre-heated to 200 °C.
The reaction mixture was immersed in an oil bath and heated at 80 °C for 1 h.
Finally the tube was closed under vacuum and immersed in an oil bath preheated to 150°C.
The reaction mixture was immersed in an oil bath at 75°C and stirred for 45 min.
The red-orange mixture was immersed in an oil bath preheated to 44 °C.
The mixture was subsequently immersed in an oil bath thermostated to 70°C for 10 h.
The reaction mixture is immersed in an oil bath heated beforehand to 120°C.
The reaction mixture was immersed in an oil bath at 75°C and stirred for 2 hr.
The round bottom flask was immersed in an oil bath which had been pre-heated to 90 °C.
The stirred solution is then immersed in an oil bath and polymerized at 130°C for 6 hours.
The Schlenk tube is immersed in an oil bath heated at 100 ° C. for a given time.
You'll also be interested in:
Examples of using Immersed
Show more
The pump must be immersed in water completely
Immersed in the world of books and ideas
In your eyes you immersed meand denied it
Examples of using Bath
Show more
You can take a bath if you want to
Bath water cools while pump is operating
I want to take a bath in the basin too
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
