Examples of 'impedance can' in a sentence
Meaning of "impedance can"
impedance can: This phrase is not a standard English phrase. It may be a typo or mistranslation
How to use "impedance can" in a sentence
Basic
Advanced
impedance can
This impedance can be obtained in various ways.
Iontophoretic current or electrode impedance can also be monitored.
Impedance can be thought of as an extension to the concept of resistance.
The measurement impedance can be a simple capacitor.
Any suitable device for measuring impedance can be used.
This third impedance can also be variable.
Therefore, only a detector with very high impedance can be used.
The impedance can be measured from difference in amplitude.
Measurement of thoracic impedance can be useful in this regard.
The impedance can nevertheless be easily deduced from the admittance.
The accuracy of the measurement of impedance can be subject to a number of external factors.
Impedance can be used to determine the depth of a pore made by any means.
The intrinsic impedance can be expressed as.
Impedance can be measured with time varying potentials or currents at some specified frequency.
The line section of high impedance can be linked to a ground electrode.
See also
The impedance can also function as a current limiter and as a fuse for subsequent components.
At the bottom of the audio band the impedance can be several tens of kilohms.
Line length impedance can be determined under short circuit conditions.
The float voltage may drop slightly but impedance can find this failure mode easily.
The fall in impedance can be detected and the frequency of resonance measured.
With Tube amplifiers using the incorrect impedance can seriously damage your amplifier.
Such an impedance can be used to control the properties of the feedback branch.
Kers are connected to one channel, the impedance can be approximately calculated as follows.
This impedance can be a resistor placed in series with the output of the converter.
Using other earphones / headphones with a lower impedance can damage the device or earphone / headphone.
Such low impedance can result in unwanted or accidental transmission of relatively high current levels.
Using other earphones / headphones with a lower impedance can damage the eBook reader or earphone / headphone.
The input impedance can then be used for calculating several loop qualification parameters.
FIG . 8 shows circuits with which the automatic control of the variable impedance can be made.
The surface impedance can be calculated and tested separately.
To determine its patho-physiological evolution, a living tissue 's electrical impedance can be continuously evaluated.
A purely resistive impedance can be easily matched with a purely resistive antenna impedance.
Component 402 may be a switch or other component whose impedance can be varied by electric control.
The calculation of impedance can require long division and other lengthy mathematical manipulations.
After rearranging of ( 15 ) the value of residual impedance can be obtained EPMATHMARKEREP.
The transthoracic impedance can vary based on the position of electrodes and defibrillator equipment.
In particular, the elements R 2 and Q 2 modelling the contact impedance can thus be determined.
The short circuit impedance can be used as the impedance in a Thevinin equivalent.
More information about the equivalent human impedance can be found elsewhere 37, 38.
Similarly, impedance can be measured between specific pairs of electrodes.
Using other earphones / headphones with a lower impedance can damage the Liro Color or earphone / headphone.
The input impedance can be determined from an air column 's impulse response.
Using other earphones / headphones with a lower impedance can damage the eBook-Reader or earphone / headphone.
An impedance can be represented as the sum of a real part plus an imaginary part,.
However the antenna and feedline impedance can vary depending on frequency and other factors.
Impedance can be measured between the two conductive pads 59.
Advantageously, the contact impedance can be measured by means of an impedance spectroscopy.
By varying the patterns of the polygons 18 ( or meanderline ), a different overall impedance can be obtained.
As a result, the impedance can be reduced to a third or a quarter of its value.
For example, the matching impedance can be 50 Ohms.
