Examples of 'impedance must' in a sentence
Meaning of "impedance must"
impedance must: This phrase suggests that there is a necessity or requirement for a certain level of impedance in a system or circuit. Impedance is the measure of opposition to the flow of alternating current in a circuit
How to use "impedance must" in a sentence
Basic
Advanced
impedance must
Speaker impedance must be set as shown below.
But that does not mean that understanding the impedance must be difficult.
Like impedance must always face like in these combinations.
In the mono configuration, the connected speaker system impedance must be 4 Ohm or higher.
Mode the impedance must be not less than 8.
When adopting this type of configuration, the speaker impedance must never fall below 4 Ohm.
This impedance must be reactive, that is, it must be a capacitance or an inductance.
In other words, variable impedance must not face variable impedance.
In BRIDGE operation mode the minimal connected impedance must be 4 Ohm.
The minimum final subwoofer impedance must not be lower than 4 Ohms per channelpair.
For maximum power transfer, the load, cable and source impedance must be equal.
In bridged mode the impedance must be not less than 8Ω.
LOUDSPEAKER CONNECTIONS - In 4-channel operation ( one loudspeaker on each amplifier channel ), the impedance must.
The speaker impedance must be at least 4 Ohm DIN rating.
When adopting this type of configuration, the diffuser impedance must never fall below 4 Ohm.
See also
The speaker impedance must be 2 ohms to 8 ohms.
Load may be any combination of speakers but impedance must be 2 Ω or larger.
Subwoofer impedance must be from 2 to 8 ohms.
SUBWOOFER CONNECTIONS - The total loudspeaker impedance must not be lower than 1 ohm.
Furthermore, the total impedance must be at least 4 Ω.
If you wish to bridge-connect a speaker, the speaker impedance must be no less than 4 ohms.
In mono-mode, the load impedance must be kept at or above 2 ohms!
If you use external speakers, the impedance must be 8 Ω.
LOUDSPEAKER CONNECTIONS - The total impedance must not be lower than 2 ohms.
If you use external speakers, the impedance must be 4 Ω or 8 Ω.
