Examples of 'inches per minute' in a sentence
Meaning of "inches per minute"
inches per minute - This phrase is a unit of measurement commonly used to express speed or velocity, particularly in industrial or manufacturing contexts. It indicates the distance of movement covered in inches within a time span of one minute. The rate of "inches per minute" is used to quantify the speed of various processes, such as cutting, drilling, or machining operations.
How to use "inches per minute" in a sentence
Basic
Advanced
inches per minute
Rate of burn measured in inches per minute.
Inches per minute.
Q is volumetric water flow in cubic inches per minute.
The test is conducted at room temperature with a test speed of 20 inches per minute.
For example, the target may move at a rate of 30 inches per minute while sputtering.
Load the specimen in displacement control at a rate of about 0.2 inches per minute.
Cut speeds of at least 10 inches per minute IPM.
Then I will just cancel this out and now I have got inches per minute.
The peel speed is 12 inches per minute.
At their fastest, the twin machines can move as much as four inches per minute.
The peel rate was 10 inches per minute.
A tensile tester was set up with a crosshead speed of 0.5 inches per minute.
The extrusion speed was 3 inches per minute.
It 's one of the high-performing tires with a maximum air flow of 6400 cubic inches per minute.
So I am going three hundred and thirty-six inches per minute.
See also
The tensile test uses a crosshead speed of two inches per minute.
So that equals three hundred and thirty-six inches per minute.
The cross head speed was set at 12 inches per minute.
Preferably, the rate of transfer is about 7 inches per minute.
All tensile strengths are for a crosshead speed of 0.2 inches per minute.
The crosshead speed of the instron was set at 40 inches per minute.
The layer system may be deposited at a line speed of about 67 inches per minute.
For example, say you are blowing up a balloon at a rate of 300 cubic inches per minute.
A five-pound load cell was used, and the test speed was set at 12 inches per minute.
Test specimens are pulled with an Instron Tester at 20.0 inches per minute to failure.
Tensile Strength measure in accordance with ASTM D-638 at 2 inches per minute.
Tensile testing is determined vía ASTM D-638 at 2 inches per minute strain rate.
You'll also be interested in:
Examples of using Minute
Show more
Would not take a minute to turn them on
The minute display will start flashing
We have got about a minute before it blows
Examples of using Inches
Show more
Values in inches are converted to feet when required
That bullet missed my head by five inches
Two inches above your belly button
