Examples of 'incorrectly set' in a sentence
Meaning of "incorrectly set"
When something is incorrectly set, it means that a setting or configuration has been adjusted or chosen in an incorrect or improper manner. This can refer to various things like the settings on an electronic device, the parameters of a software program, or the positioning of physical objects
How to use "incorrectly set" in a sentence
Basic
Advanced
incorrectly set
Heat anticipator in thermostat incorrectly set or may be defective.
Incorrectly set stroke on the lever.
The water line height may be incorrectly set.
Incorrectly set battery type may damage the battery.
The dialling mode is incorrectly set.
Incorrectly set operating parameters may damage the battery.
Scanning frequency or phase incorrectly set.
Incorrectly set up work stations.
The clock source is incorrectly set.
An incorrectly set blade increases the risk of jamming and blade thrust.
The accident was caused by an incorrectly set rudder trim.
At an incorrectly set speed the bit may get jammed in the workpiece.
It is reported that the owner of the site incorrectly set it up.
Incorrectly set values may result in an offset within the print image.
The air pressure is too low combustion head incorrectly set.
See also
An incorrectly set selector switch can lead to severe product damage and poor results.
Signals should have prevented the disaster but it is believed they were incorrectly set.
The propeller pitch was incorrectly set and the attempt achieved only a short hop.
The Master Outlet threshold may be incorrectly set.
Throttle set incorrectly Set trim to neutral.
Somewhere, the date stamp was incorrectly set.
Incorrectly set carburettor Have the carburettor adjusted by.
Analogue output scale incorrectly set up Check analogue output settings.
Incorrectly set carburettor Have the carburettor adjusted by authorised customer service.
Air intake incorrectly set See above.
Incorrectly set goals The goals set up in Google Analytics are inadequate.
Temperature Regulator may be set incorrectly Set a lower temperature.
Offset incorrectly set up Check offset.
Water is not of the desired hardness Hardness incorrectly set Adjust hardness range.
Input gain incorrectly set - input overloading or insufficiently amplified.
Record player is connected to wrong input of amplifier, or MM/MC switch incorrectly set.
Depth scale incorrectly set Dirty planing table.
Interference Take a short break and then re-try Throttle set incorrectly Set trim to neutral.
Measurement input incorrectly set up Change set up in operating menu.
Code not accepted by ECHO . 2 Your communications parameters are incorrectly set.
Injection pump incorrectly set Contact with our dealer.
The [ SMART GRID ] parameter is active and the connections are incorrectly set.
Process transmitter incorrectly set up Please chaeck the input range.
An incorrectly set AWB can be useful, but most of the time annoying.
The name of a Band Member is incorrectly set out ; or e.
Incorrectly set Have the carburettor adjusted by fuel / air mix on carburettor . authorised customer service.
Chisel tip is rotating Tool incorrectly set Select roto-stop mode.
Incorrectly set up items can result in,.
CO2 value too low Air intake incorrectly set Check combustion chamber settings.
Incorrectly set spark gap Clean/adjust spark plug or replace. on spark plug.
Note - If Video output is incorrectly set to S-Video, the screen will turn red.
MM / MC mode incorrectly set - input overloading or insufficiently amplified.
It may be disconnected, incorrectly set or defective or maybe the blower is not running.
Injection pump incorrectly set c7 faulty oil pressure valve l7.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
