Examples of 'ingot' in a sentence
Meaning of "ingot"
ingot (noun) - A mass of metal, typically rectangular in shape, cast in a convenient form for storage or transportation
Show more definitions
- A solid block of more or less pure metal, often but not necessarily bricklike in shape and trapezoidal in cross-section, the result of pouring out and cooling molten metal, often immediately after smelting from raw ore or alloying from constituents.
- To form (scraps of metal) into ingots.
How to use "ingot" in a sentence
Basic
Advanced
ingot
A gold ingot only weighs five taels.
Both techniques are applicable to ingot or continuous casting.
The ingot may also be cast in a mold.
It cut through an iron ingot like it was nothing.
The ingot evaporation rate was also varied.
Solidification rate in ingot and continuous casting.
The ingot is then cut into sections.
Spedding had the ingot cut open.
One ingot for the whole country.
They also exported silver in ingot form.
Radiation from ingot mould outer surfaces.
This property is shown to improve ingot yields.
The ingot is subsequently pulverized into particles.
Wafer is produced from slicing this ingot.
The ingot was hot forged to produce a block.
See also
Second phase of thermal equalization of the ingot.
The ingot is embedded in a special investment material.
The starting alloy was in the form of an ingot.
The ingot is hot forged to produce a billet.
A phase of forced supply of the ingot molds.
The rolling ingot is then hot rolled.
Influence of the shape of the ingot mould.
An ingot can be made out of this.
At a given moment he saw an ingot mould turning.
Previous ArticleHow to make a precious metal ingot.
Note regarding the ingot size effect.
Ours along the axis of the ingot.
Protective measures for ingot casters in oxjyrgen steelworks.
The final product is an impure gold ingot.
The result is a decrease in ingot surface quality.
Next ArticleHow to make a precious metal ingot.
Then the ingot is placed in the soaking pit.
The smelted steel is cast into an ingot.
Distance from ingot wall in cm.
This heat treatment homogenizes the ingot.
Ingot moulds of metal for castings.
One easily transported form is a foundry ingot.
Final part of an ingot consisted of a mix of sulfide phases.
Do not preheat the plunger or ingot.
Every ingot had to be digitally touched up in every shot.
Outside edge of ingot mould opening.
Ingot production using reverberatory furnaces.
It is a low level ingot we have created on previous step.
Temperature at the inner surface of the ingot mould.
Not an ingot of their basest metal.
I have not got an ingot with me.
It was an ingot of silver worth at least three hundred pounds.
First upsetting said bloom or ingot to an intermediate height.
The ingot mold is cooled by the sheet of water.
The crystallinity of the ingot obtained is not satisfactory.
